BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00278589BTC
I lager
NEMIX RAM
NEMIX RAM 32GB (2×16GB) DDR4 2400 CL17 260-pin SODIMM memory upgrade
A 32 GB DDR4 SODIMM kit with two 16 GB modules running at 2400 MHz, CL17 latency and 1.2 V for QNAP TVS-673e and TVS-873e NAS systems
- Capacity32GB (2 x 16GB)
- SpeedDDR4 2400 (PC4 19200)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32 GB kit expands NAS capacity for heavier workloads
- DDR4 2400 speed with CL17 latency supports responsive data access
- 2 V operation reduces power draw in compatible QNAP models
- 260-pin SODIMM form factor fits TVS-673e and TVS-873e bays
- Major OEM chips from Samsung, Micron or Hynix ensure module reliability
QNAP NAS 32GB DDR4 Kit
This 32GB kit contains two 16GB DDR4 2400 SODIMM modules built for QNAP TVS-673e and TVS-873e NAS units. It runs at 1.2V with CL17 latency and uses 2Rx8 unbuffered non-ECC chips from major OEM suppliers. The 260-pin form factor fits the memory slots in these specific QNAP models.
Upgrade from lower capacity or speed
Replacing smaller DDR4 SODIMMs or slower memory with this 32GB kit adds headroom for virtual machines, heavy file serving and multi-user workloads on the TVS-673e and TVS-873e. The jump is worth it when the NAS regularly hits memory limits during concurrent tasks or container operations.
DDR4 SODIMM platform limits
The DDR4 2400 interface caps bandwidth at the PC4-19200 rate, so faster modules will downclock to this speed in these NAS units. Non-ECC unbuffered design means the memory cannot correct single-bit errors, which may matter for data integrity in 24/7 arrays. The 260-pin socket prevents use in DIMM or other SODIMM slots.
I korthet
- 32 GB kit expands NAS capacity for heavier workloads
- DDR4 2400 speed with CL17 latency supports responsive data access
- 2 V operation reduces power draw in compatible QNAP models
- 260-pin SODIMM form factor fits TVS-673e and TVS-873e bays
- Major OEM chips from Samsung, Micron or Hynix ensure module reliability
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | QNAP NAS Compatible Series Memory |
| Model | QNAP DDR4 2666MHZ ECC Unbuffered SODIMM NAS Memory |
| Part Number | MS19200-628K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 2400 (PC4 19200) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Qnap |
| CAS Latency | CL17 |
| Heat Spreader | No |
| Type | 260-PIN DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM KIT |
Frågor om den här produkten
Will the 260-pin DDR4 SODIMM modules fit the memory slots on my QNAP TVS-673e or TVS-873e?
Yes, the kit uses the standard 260-pin DDR4 SODIMM form factor that matches the slots on those QNAP NAS models.
What is the correct way to seat the SODIMM sticks, and what step do people often miss?
Insert each module at an angle until the gold contacts disappear, then press down firmly until both side clips click into the notches.
When should I expect to replace these 1.2 V CL17 modules in a 24/7 NAS?
DDR4 SODIMMs have no moving parts and typically last the life of the NAS; replace only if diagnostics report memory errors.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
