BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00278882BTC
I lager
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR4 2666 CL19 SODIMM QNAP TVS-h674T
A 32 GB kit of two 16 GB DDR4 2666 CL19 SODIMM modules built for the QNAP TVS-h674T NAS
- Capacity32GB (2 x 16GB)
- SpeedDDR4 2666 (PC4 21300)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32 GB kit doubles NAS capacity for demanding workloads
- 2666 MT/s DDR4 speed matches QNAP TVS-h674T specifications
- CL19 latency at 1.2 V keeps power draw low
- 2Rx8 dual-rank organisation maximises memory density per slot
- 260-pin SODIMM form factor installs directly in NAS memory bays
Capacity and compatibility
This 32 GB kit contains two 16 GB DDR4 2666 SODIMM modules built for the QNAP TVS-h674T NAS. Each module runs at 1.20 V with CL19 latency and a 2Rx8 organisation. The 260-pin unbuffered non-ECC design matches the factory memory slots in that system.
Upgrading from the base configuration
Many units ship with a smaller amount of memory or a single module. Adding this matched pair doubles capacity and enables dual-channel operation, which benefits virtualisation, container workloads and large file caches. The jump is worthwhile when the NAS regularly hits its memory ceiling during heavy multi-user access.
Build integration
The modules install directly into the two SODIMM slots without tools or additional cooling. Because they are unbuffered non-ECC, they work with the standard memory controller in the TVS-h674T and leave no free slots for further expansion. The low 1.20 V draw keeps power demand minimal inside the compact chassis.
I korthet
- 32 GB kit doubles NAS capacity for demanding workloads
- 2666 MT/s DDR4 speed matches QNAP TVS-h674T specifications
- CL19 latency at 1.2 V keeps power draw low
- 2Rx8 dual-rank organisation maximises memory density per slot
- 260-pin SODIMM form factor installs directly in NAS memory bays
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | QNAP NAS Compatible Series Memory |
| Model | QNAP DDR4 2666MHZ Non-ECC Unbuffered SODIMM NAS Memory |
| Part Number | MS21300-628K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Qnap |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 260-PIN Non-ECC Unbuffered SODIMM KIT |
Frågor om den här produkten
Does this kit use 260-pin DDR4 SODIMM modules that fit the QNAP TVS-h674T slots?
Yes, each 16 GB module is a 260-pin DDR4 SODIMM built for the TVS-h674T memory slots.
What is the correct way to seat both SODIMMs so the system recognises the full 32 GB?
Insert each module at an angle until the gold contacts disappear, then press down firmly until the side clips click on both sticks.
When should I consider replacing these non-ECC unbuffered modules?
Replace them if the NAS shows repeated memory errors, fails to boot with both installed, or you upgrade to a platform that requires ECC memory.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
