BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00277761BTC
I lager
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR5 4800 CL40 1.1V UDIMM ASRock Z790 PG Riptide
32 GB dual-channel DDR5 kit at 4800 MT/s with CL40 latency and 1.1 V operation for the ASRock Z790 PG Riptide motherboard
- Capacity32GB (2 x 16GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 32 GB kit (2 × 16 GB) doubles desktop memory capacity
- DDR5 4800 speed with CL40 latency for responsive system performance
- Low 1.10 V operation reduces power draw and heat
- Validated for ASRock Z790 PG Riptide motherboard compatibility
- Built with major-brand Samsung, Micron or Hynix DRAM chips
ASRock Z790 PG Riptide Kit
This 32GB kit contains two 16GB DDR5 UDIMMs validated for the ASRock Z790 PG Riptide motherboard. The modules run at 4800 MT/s with a CL40 latency at 1.1V. They use major OEM chips and are non-ECC unbuffered.
Builders Matching This Board
The kit suits anyone upgrading or populating an ASRock Z790 PG Riptide system with guaranteed compatibility. Buyers needing ECC error correction or registered modules should look elsewhere, as this kit provides neither.
PC5-38400 Speed Rating
The decisive spec is the PC5-38400 rating, which confirms DDR5 4800 operation for this platform. Systems requiring a different data rate or voltage will not accept these modules.
I korthet
- 32 GB kit (2 × 16 GB) doubles desktop memory capacity
- DDR5 4800 speed with CL40 latency for responsive system performance
- Low 1.10 V operation reduces power draw and heat
- Validated for ASRock Z790 PG Riptide motherboard compatibility
- Built with major-brand Samsung, Micron or Hynix DRAM chips
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | ASRock Gaming Motherboard Compatible Series Memory |
| Model | ASRock DDR5 4800MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD38400-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM KIT |
Frågor om den här produkten
Will these 288-pin DDR5 modules fit the four slots on my ASRock Z790 PG Riptide?
Yes — the kit is a 288-pin DDR5 UDIMM and the board uses the same DDR5 slot layout, so each 16 GB stick seats directly in any of the four DIMM sockets.
Do I need to enable XMP or EXPO in the BIOS after inserting the sticks, or will they run at 4800 CL40 automatically?
The modules are rated 4800 MT/s CL40 at 1.10 V JEDEC standard; they will boot at that speed without any manual profile, though you can still enable XMP if the board offers a higher profile.
Since there is no heat spreader, will I need extra airflow or a replacement kit later?
The bare PCB runs at standard 1.10 V DDR5 voltage; normal case airflow is sufficient, and the modules carry a lifetime replacement warranty if a stick ever fails.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
