BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00281088BTC
I lager
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR5 4800 CL40 1Rx8 1.1V UDIMM memory upgrade
A 32 GB dual-channel kit of DDR5 4800 CL40 UDIMM memory built for ThinkMate TWX-QS4-14R7 tower servers
- Capacity32GB (2 x 16GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 32 GB kit expands server memory capacity
- DDR5 4800 speed supports demanding workloads
- 1 V operation reduces power consumption
- CL40 latency maintains responsive performance
- Validated for Thinkmate TWX-QS4-14R7 compatibility
32 GB DDR5 kit for Thinkmate TWX-QS4-14R7
This 32 GB kit contains two 16 GB DDR5 4800 UDIMM modules built for the Thinkmate TWX-QS4-14R7 tower server. It targets administrators who need a straightforward capacity increase without ECC overhead. The modules arrive new and are validated for that specific platform.
Unbuffered non-ECC design
Each stick uses a 1Rx8 organisation at 1.10 V and carries no heat spreader, keeping the profile low for dense server chassis. The 288-pin DDR5 interface fits the board’s native slots directly, so installation follows the usual DIMM seating procedure. Non-ECC unbuffered operation means the memory controller handles error detection, which suits workloads that tolerate standard reliability.
CL40 latency at DDR5 4800 decides fit
The kit runs at PC5-38400 with a CAS latency of 40, a timing set by the platform’s memory controller. If the server’s qualified vendor list calls for CL40 at 4800 MT/s, this part matches; if the system requires lower latency or registered ECC modules, this kit will not meet the spec.
I korthet
- 32 GB kit expands server memory capacity
- DDR5 4800 speed supports demanding workloads
- 1 V operation reduces power consumption
- CL40 latency maintains responsive performance
- Validated for Thinkmate TWX-QS4-14R7 compatibility
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | THINKMATE Server/Workstation Compatible Series Memory |
| Model | THINKMATE DDR5 4800MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD38400-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | THINKMATE |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM KIT |
Frågor om den här produkten
What does the DDR5 4800 PC5-38400 rating mean for real-world bandwidth?
Each module runs at 4800 MT/s with a PC5-38400 designation, providing 38400 MB/s theoretical bandwidth per stick in dual-channel configuration.
Will these 288-pin UDIMMs fit the memory slots in a ThinkMate TWX-QS4-14R7 tower server?
Yes, the 288-pin DDR5 UDIMM form factor matches the DIMM slots on the ThinkMate TWX-QS4-14R7, and the kit is validated for that platform.
What is the correct seating procedure for these non-ECC unbuffered modules, and what step is most often missed?
Align the notch with the slot key, press straight down until both side clips click shut, then verify the clips are fully locked; the missed step is checking both clips.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
