BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00278391BTC
I lager
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR5 5600 CL46 1.1V UDIMM SuperMicro C9Z790-CG memory upgrade
32 GB DDR5 kit with two 16 GB UDIMM modules running at 5600 MHz CL46 1.1 V for SuperMicro C9Z790-CG motherboards
- Capacity32GB (2 x 16GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 32 GB capacity with 2 × 16 GB modules for expanded multitasking
- DDR5 5600 speed rated at PC5-44800 for high data throughput
- Low 1.10 V operating voltage reduces power draw and heat
- CL46 CAS latency timed for responsive system performance
- Validated for SuperMicro C9Z790-CG motherboard compatibility
SuperMicro C9Z790-CG DDR5 kit
This 32 GB kit contains two 16 GB DDR5 UDIMMs built for the SuperMicro C9Z790-CG motherboard. It targets IT professionals and workstation builders who need validated, non-ECC memory for stable daily operation.
5600 MT/s CL46 with 1.10 V headroom
The modules run at 5600 MT/s (PC5-44800) with CL46 latency at the standard 1.10 V. Two ranks of 1Rx8 Samsung, Micron or Hynix chips give 32 GB total capacity for typical server and workstation workloads; heavier virtualisation or large datasets will exceed this amount.
Unbuffered 288-pin design without spreaders
Each stick is an unbuffered 288-pin UDIMM without a heat spreader, keeping the profile low for dense chassis. The kit is stress-tested for compatibility, so installation follows the board manual without extra clearance planning.
I korthet
- 32 GB capacity with 2 × 16 GB modules for expanded multitasking
- DDR5 5600 speed rated at PC5-44800 for high data throughput
- Low 1.10 V operating voltage reduces power draw and heat
- CL46 CAS latency timed for responsive system performance
- Validated for SuperMicro C9Z790-CG motherboard compatibility
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | Supermicro DDR5 5600MHZ Non-ECC Unbuffered RAM |
| Part Number | MD44800-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-PIN DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR5 5600MHZ PC5-44800 1Rx8 1.1V CL46 288-PIN Non-ECC Unbuffered UDIMM KIT |
Frågor om den här produkten
Will the 1.10V DDR5 5600 modules run stably with the SuperMicro C9Z790-CG motherboard's default memory settings?
Yes, the kit is validated for the C9Z790-CG and operates at the standard 1.10V DDR5 voltage with CL46 timings at 5600 MT/s without manual tuning.
How can I confirm the 32GB kit is detected at 5600 MT/s CL46 after installation?
Enter the UEFI/BIOS on first boot and verify the memory frequency shows 5600 MT/s with CAS latency 46; the OS task manager or dmidecode will also report 32GB at that speed.
Does the package contain only the two 16GB UDIMMs or are any cables or brackets included?
The box includes only the two 16GB 288-pin DDR5 UDIMM modules; no cables, brackets or additional accessories are supplied.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
