Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Single green 288-pin DDR4 UDIMM module, no heat spreader, black chips visible

NEMIX RAM

NEMIX RAM 32GB DDR4 2666MHz CL19 2Rx8 1.2V 288-pin UDIMM memory upgrade

SKU CH-RQPX-W9G39

32 GB DDR4 module rated at 2666 MHz with CL19 latency and 1.2 V operation for compatible Supermicro desktop systems

  • Capacity32GB
  • SpeedDDR4 2666 (PC4 21300)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32GB capacity expands desktop workstation memory headroom
  • DDR4 2666MHz speed matches SuperMicro motherboard specifications
  • CL19 latency supports stable operation under sustained loads
  • 2V voltage reduces power draw and heat output
  • 2Rx8 288-pin UDIMM form factor ensures direct compatibility

NEMIX RAM 32GB DDR4 2666MHz UDIMM

This 32GB DDR4 module runs at 2666MHz with CL19 latency and 1.2V operation. It is built as a 2Rx8 unbuffered non-ECC UDIMM using major OEM chips from Samsung, Micron or Hynix. The kit targets Supermicro desktop and workstation motherboards such as the MBD-C9Z390-CG for memory capacity upgrades.

288-pin unbuffered design without heat spreader

The standard 288-pin DDR4 UDIMM form factor fits directly into compatible desktop DIMM slots without registration or buffering. Absence of a heat spreader keeps the module low-profile for tight clearance around large CPU coolers. Single-module packaging allows flexible population of available slots on supported Supermicro boards.

Verify DDR4 2666 support

Confirm the motherboard accepts DDR4 2666MHz non-ECC unbuffered UDIMMs and supports 32GB density per slot before ordering. Check the system manual for qualified vendor lists and population rules that may limit rank configuration or total memory. Ensure the platform does not require registered or ECC modules for stable operation.

I korthet

  • 32GB capacity expands desktop workstation memory headroom
  • DDR4 2666MHz speed matches SuperMicro motherboard specifications
  • CL19 latency supports stable operation under sustained loads
  • 2V voltage reduces power draw and heat output
  • 2Rx8 288-pin UDIMM form factor ensures direct compatibility

Specifikationer

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSupermicro DDR4 2666MHZ Non-ECC Unbuffered UDIMM
Part NumberMD21300-328K1
Capacity32GB
SpeedDDR4 2666 (PC4 21300)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL19
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank2Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (1X32GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 288-PIN Non-ECC Unbuffered UDIMM

Frågor om den här produkten

Does the DDR4 2666 PC4-21300 interface cap real-world throughput at the rated speed?

The module runs at DDR4 2666 MT/s (PC4-21300). Throughput is limited by the motherboard memory controller and the slowest DIMM installed.

What physical slot and clearance does the 288-pin UDIMM need?

It requires a standard 288-pin DDR4 UDIMM slot. No heat spreader is fitted, so low-profile CPU coolers will not interfere.

How is the module installed and which step is often missed?

Align the notch with the slot key, press down until both retention clips click. The step often missed is verifying the clips fully lock on each side.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.