BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00276682BTC
I lager
NEMIX RAM
NEMIX RAM 32GB DDR4 3200 CL22 1.2V 2Rx8 260-Pin SODIMM QNAP TVS-h674T memory upgrade
A 32 GB DDR4 3200 SODIMM module with CL22 latency and 1.2 V operation, validated for the QNAP TVS-h674T NAS
- Capacity32GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32 GB capacity expands NAS workload headroom
- DDR4 3200 speed matches QNAP TVS-h674T spec
- CL22 latency at 1.20 V keeps power draw low
- 2Rx8 260-pin SODIMM fits the NAS memory slot
- Major OEM chips tested under load for stability
QNAP NAS memory upgrade
This 32GB DDR4 SODIMM is built for the QNAP TVS-h674T NAS. It targets administrators who need to expand memory in that specific platform. The module uses 260-pin DDR4 technology and operates at 1.2V.
Capacity and latency
The single 32GB stick runs at 3200MHz with CL22 timings. It provides substantial headroom for virtual machines, container workloads and large file caches. The unbuffered non-ECC design means error correction is not available for critical data integrity tasks.
Build integration
The module fits directly into the NAS SODIMM slots without a heat spreader. It requires a compatible QNAP system that accepts 2Rx8 unbuffered DDR4 memory. Installation frees no additional slots beyond the one occupied.
I korthet
- 32 GB capacity expands NAS workload headroom
- DDR4 3200 speed matches QNAP TVS-h674T spec
- CL22 latency at 1.20 V keeps power draw low
- 2Rx8 260-pin SODIMM fits the NAS memory slot
- Major OEM chips tested under load for stability
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | QNAP NAS Compatible Series Memory |
| Model | QNAP DDR4 3200MHZ Non-ECC Unbuffered SODIMM NAS Memory |
| Part Number | MS25600-328K1 |
| Capacity | 32GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Qnap |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 32GB (1X32GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM |
Frågor om den här produkten
Will this 32GB DDR4 3200 CL22 SODIMM run with the existing memory already installed in my QNAP TVS-h674T?
Yes, this module is designed for the TVS-h674T and uses standard DDR4 3200 specifications; the NAS will configure timings automatically at boot.
How can I confirm the new 32GB module is recognised and running at 3200MHz after installation?
Power on the NAS, open the QTS Control Panel, go to System > Hardware and verify the total memory shows the added 32GB and the speed reads 3200MHz.
Does the package include only the 260-pin SODIMM or are tools and thermal pads also supplied?
The box contains the single 32GB 260-pin DDR4 SODIMM only; no tools, screws or heat spreaders are included.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
