BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00278687BTC
I lager
NEMIX RAM
NEMIX RAM 32GB DDR5 6400 CL52 2Rx4 ECC RDIMM SuperMicro X14SBW-F memory upgrade
32 GB DDR5 6400 CL52 ECC registered RDIMM for SuperMicro X14SBW-F servers
- Capacity32GB
- SpeedDDR5 6400 (PC5 51200)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 32 GB capacity expands server memory headroom
- DDR5 6400 speed delivers high data throughput
- ECC registered design protects data integrity
- 1 V operation reduces power draw
- Validated for SuperMicro X14SBW-F compatibility
32 GB DDR5 6400 ECC RDIMM for SuperMicro X14SBW-F
This registered DDR5 module delivers 32 GB at 6400 MT/s with CL52 latency and ECC protection. It is built for the SuperMicro X14SBW-F platform where data integrity and registered signalling are required. The single 2Rx4 stick fits one 288-pin slot and operates at the standard 1.1 V. IT teams upgrading mission-critical servers or workstations will find it a direct fit.
Thermals noise and power at 1.1 V
Running at 1.1 V the module draws minimal power and produces little heat without a heat spreader. Passive airflow inside a server chassis is sufficient for typical workloads. No active cooling is needed and acoustic impact is negligible. The registered buffer helps keep the memory bus stable during normal operation.
Sustained load behaviour with ECC registered design
Under continuous load the ECC logic corrects single-bit errors on the fly while the registered interface reduces electrical loading on the memory controller. This combination maintains data integrity during long AI training runs, database transactions or virtualization workloads. The 2Rx4 organisation supports high density without exceeding the platform's electrical limits. Not suited for non-ECC consumer boards or systems that require unbuffered DIMMs.
I korthet
- 32 GB capacity expands server memory headroom
- DDR5 6400 speed delivers high data throughput
- ECC registered design protects data integrity
- 1 V operation reduces power draw
- Validated for SuperMicro X14SBW-F compatibility
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | Supermicro DDR5 6400MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR51200-324K1 |
| Capacity | 32GB |
| Speed | DDR5 6400 (PC5 51200) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL52 |
| Heat Spreader | No |
| Type | 288-PIN DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 32GB (1X32GB) DDR5 6400MHZ PC5-51200 2Rx4 1.1V CL52 288-PIN ECC RDIMM Registered Server Memory |
Frågor om den här produkten
How do I install the 288-pin DDR5 RDIMM in the SuperMicro X14SBW-F, and what step is often missed?
Power down the server, open the chassis, align the notch on the module with the slot key, press firmly until both retention clips click, then verify in BIOS that the 6400 speed and ECC are active.
What maintenance or replacement will the 32GB ECC registered module need over its service life?
No routine maintenance is required; the module has no heat spreader or moving parts, and ECC corrects single-bit errors internally, so replacement only occurs if a hardware failure is detected.
What limit appears first when the 2Rx4 RDIMM runs sustained workloads at 6400 MT/s?
The CAS latency of CL52 and the fixed 1.10 V operating voltage set the timing and thermal envelope that define sustained throughput.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
