BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00278333BTC
I lager
NEMIX RAM
NEMIX RAM 384GB (8 x 48GB) DDR5 6400MHz CL52 ECC RDIMM Supermicro H13SRH memory upgrade
A 384 GB DDR5 registered ECC kit of eight 48 GB modules at 6400 MHz CL52, validated for the Supermicro H13SRH motherboard
- Capacity384GB (8 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 384 GB capacity across eight 48 GB modules
- DDR5 6400 speed with CL52 latency for rated performance
- Registered ECC design corrects single-bit errors on the fly
- 1 V operation matches server memory controller requirements
- 288-pin RDIMM form factor fits Supermicro H13SRH motherboard
Supermicro H13SRH 384GB DDR5 kit
This 384GB kit contains eight 48GB DDR5 6400MHz CL52 registered ECC RDIMMs built for the Supermicro H13SRH motherboard. Each module runs at 1.1V with a 2Rx8 organization and fits the board's 288-pin DDR5 slots. The registered design lets the memory controller drive every populated slot at the rated speed.
Suited for full-capacity server builds.
System integrators populating all eight channels on an H13SRH board get the exact rank, voltage and timing the firmware expects. Workstations or consumer boards that require unbuffered non-ECC DDR5 cannot use these registered modules. Buyers who need a smaller capacity or a different form factor should look at other kits.
Registered ECC RDIMM architecture decides fit
The 288-pin RDIMM form factor with on-board register and ECC is the single specification that determines compatibility. Only motherboards wired for registered DDR5 ECC memory will recognize and run this kit at 6400MHz.
I korthet
- 384 GB capacity across eight 48 GB modules
- DDR5 6400 speed with CL52 latency for rated performance
- Registered ECC design corrects single-bit errors on the fly
- 1 V operation matches server memory controller requirements
- 288-pin RDIMM form factor fits Supermicro H13SRH motherboard
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-4828K8 |
| Capacity | 384GB (8 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 384GB 8X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Frågor om den här produkten
How do I install the 288-pin DDR5 RDIMM modules on the Supermicro H13SRH, and which population step is often missed?
Follow the motherboard manual for the exact slot order; the 8-module 384GB kit must fill all channels in the prescribed sequence so the memory controller recognises every 48GB rank at DDR5 6400 CL52.
What maintenance or replacement will the registered ECC RDIMM kit need over its service life?
The modules have no moving parts or heat spreaders; ECC corrects single-bit errors automatically, and the lifetime replacement warranty covers any module that fails validation.
What limit appears first when the 8 x 48GB kit runs sustained workloads at 1.1V?
The registered buffer and 2Rx8 organisation keep the memory controller stable at full 384GB capacity, so the practical ceiling is the board's maximum supported density rather than signal integrity.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
