Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Four green DDR5 RDIMM sticks in anti-static tray

NEMIX RAM

NEMIX RAM 512GB (4×128GB) DDR5 4800 CL40 ECC Registered RDIMM for Supermicro H14DST-F

SKU CH-6ZRS-NF17V

A 512 GB DDR5 ECC registered RDIMM kit of four 128 GB modules running at 4800 MT/s with CL40 latency and 1.1 V for the Supermicro H14DST-F motherboard

  • Capacity512GB (4 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 512GB 4X128GB

Visa 30 fler konfigurationer
  • 512 GB total capacity from four 128 GB modules for maximum server density
  • DDR5 4800 speed with CL40 latency matches the board's rated timing exactly
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 10 V operation and 2Rx4 organisation follow the H14DST-F memory population rules
  • 288-pin RDIMM form factor fits the Supermicro H14DST-F DIMM slots precisely

Exact-match DDR5 kit for Supermicro H14DST-F

This 512GB kit contains four 128GB DDR5-4800 RDIMMs built to the precise rank, voltage and timing the server's memory controller expects. Each module is a 2Rx4 Registered ECC DIMM operating at 1.1V with CL40 latency. The 288-pin form factor matches the board's requirement exactly.

Who this suits and who should look elsewhere

It suits administrators populating every slot on a Supermicro H14DST-F motherboard with the maximum supported capacity of registered ECC memory. It is not for systems that require unbuffered UDIMMs, SODIMMs, or a different DDR generation. Builders needing lower density per module or a different pin count should choose another kit.

Behaviour under sustained load

Registered architecture offloads the memory controller so all four slots remain stable when fully populated at rated speed. ECC corrects single-bit errors on the fly, preventing silent data corruption during long-running workloads. The 1.1V operating voltage keeps power draw consistent across extended operation.

I korthet

  • 512 GB total capacity from four 128 GB modules for maximum server density
  • DDR5 4800 speed with CL40 latency matches the board's rated timing exactly
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 10 V operation and 2Rx4 organisation follow the H14DST-F memory population rules
  • 288-pin RDIMM form factor fits the Supermicro H14DST-F DIMM slots precisely

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K4
Capacity512GB (4 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content512GB 4X128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Does the Supermicro H14DST-F motherboard need to support DDR5 4800 RDIMM with ECC for this 512GB kit to work?

Yes, the board must accept DDR5 4800 RDIMM modules with ECC and registered buffering, and its memory population rules must allow four 128GB 2Rx4 DIMMs at 1.1V CL40.

Can I mix these 128GB 2Rx4 DDR5 4800 RDIMMs with smaller DDR5 RDIMMs already installed in the H14DST-F?

Mixing ranks and capacities is only supported if the motherboard manual lists the specific population order; otherwise the system may not boot or may run at reduced speed.

After installing all four modules, how do I confirm the server sees the full 512GB at DDR5 4800 with ECC active?

Check the BIOS memory information page — it should report 512GB total, 4800 MT/s speed, CL40 timing, 1.1V voltage, and ECC enabled for each DIMM.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.