Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Eight green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 512GB (8×64GB) DDR5 4800 CL40 2Rx4 ECC RDIMM memory upgrade

SKU CH-MJ9H-Q38JH

Eight 64 GB DDR5 ECC registered DIMMs at 4800 MT/s, CL40, 1.1 V, validated for Supermicro SYS-211SE and X31SEED-SF servers

  • Capacity512GB (8 x 64GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 512 GB total capacity from eight 64 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • CL40 CAS latency with 2Rx4 dual-rank organisation
  • ECC registered RDIMM for data-integrity protection
  • 10 V operating voltage on 288-pin DDR5 form factor

Capacity and platform fit

This 512GB kit contains eight 64GB DDR5 4800 CL40 ECC RDIMM modules built for Supermicro servers and workstations. Registered buffering and on-die ECC protect data integrity in multi-socket systems running continuous workloads. The 1.10V operating voltage matches the DDR5 baseline for these platforms.

Suitable builds and mismatched needs

IT teams deploying SuperMicro IoT SuperServer SYS-211SE-31DS, SYS-211SE-31AS or X31SEED-SF motherboards can install this kit directly. Buyers who need non-ECC memory, lower latency timings or desktop DIMM form factors should look at something else.

Deciding specification

The registered ECC RDIMM design is the single attribute that determines whether this kit works in your server. Consumer boards that accept only unbuffered non-ECC UDIMMs cannot use these modules.

I korthet

  • 512 GB total capacity from eight 64 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • CL40 CAS latency with 2Rx4 dual-rank organisation
  • ECC registered RDIMM for data-integrity protection
  • 10 V operating voltage on 288-pin DDR5 form factor

Specifikationer

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-924K8
Capacity512GB (8 x 64GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content512GB (8X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Frågor om den här produkten

How do I install the 8×64GB DDR5 4800 RDIMMs in my Supermicro server and which slot order do I follow?

Power down the server, open the chassis, and insert each 288‑pin module into the DIMM slots specified in the Supermicro motherboard manual for 8‑DIMM population; the registered design requires correct channel order to initialise.

What maintenance or replacement will the 512GB DDR5 ECC RDIMM kit need over its service life?

The modules have no heat spreaders and no moving parts, so no periodic maintenance is required; if a module fails, the lifetime replacement warranty covers a direct swap of the defective 64GB stick.

What is the first limit I will hit when running the 4800 CL40 2Rx4 kit at full load continuously?

The CAS latency of CL40 at DDR5‑4800 sets the baseline response time; sustained workloads will be bounded by this timing before thermal or voltage limits become a factor.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.