BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.0027765BTC
I lager
NEMIX RAM
NEMIX RAM 512GB (8x64GB) DDR5 5600 CL46 2Rx4 1.1V 288-PIN ECC RDIMM memory upgrade
Eight 64 GB DDR5 ECC registered DIMMs running at 5600 MT/s with CL46 latency for Supermicro servers
- Capacity512GB (8 x 64GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 512 GB total capacity from eight 64 GB modules
- DDR5 5600 speed with CL46 latency for responsive throughput
- ECC registered design protects data integrity under load
- 1 V operation reduces power draw in dense servers
- Validated for SuperMicro MBD-X13DGU AI SuperServer motherboard
512 GB DDR5 ECC RDIMM kit
This NEMIX RAM kit provides 512 GB of DDR5 memory across eight 64 GB registered DIMMs. It is built for SuperMicro MBD-X13DGU AI SuperServer motherboards that require ECC RDIMM modules. System integrators and IT teams handling large datasets or virtualization workloads can deploy this memory to meet the board's capacity and reliability requirements.
Sustained-load behaviour
Each module operates at DDR5 5600 with a CL46 latency and 1.1 V supply voltage. The 2Rx4 organisation and registered buffer reduce electrical load on the memory controller during continuous operation. On-die ECC corrects single-bit errors in real time, helping maintain data integrity during extended AI training or database transactions without intervention.
Compatibility checks before ordering
Verify that the target motherboard is the SuperMicro MBD-X13DGU and that its firmware supports 64 GB RDIMMs at DDR5 5600. Confirm the system has eight free 288-pin DDR5 slots and that the power delivery can supply 1.1 V to all modules simultaneously. Mixed-rank or mixed-speed populations are not covered by this kit's validation.
I korthet
- 512 GB total capacity from eight 64 GB modules
- DDR5 5600 speed with CL46 latency for responsive throughput
- ECC registered design protects data integrity under load
- 1 V operation reduces power draw in dense servers
- Validated for SuperMicro MBD-X13DGU AI SuperServer motherboard
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | Supermicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR44800-924K8 |
| Capacity | 512GB (8 x 64GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-PIN DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 512GB (8X64GB) DDR5 5600MHZ PC5-44800 2Rx4 1.1V CL46 288-PIN ECC RDIMM Registered Server Memory KIT |
Frågor om den här produkten
How much power does the 512GB DDR5 5600 kit draw at its rated 1.1V during sustained server workloads?
Each 64GB module operates at 1.10V, so the eight-module kit runs at standard DDR5 voltage; total draw depends on your platform's memory controller and load profile.
What motherboard feature must my Supermicro board provide for these 2Rx4 registered ECC RDIMMs to function?
The board must support DDR5 registered ECC RDIMMs with 2Rx4 organisation and 288-pin slots; the kit is validated for the Supermicro MBD-X13DGU AI SuperServer motherboard.
Can I mix these CL46 5600 MT/s modules with existing DDR5 4800 MT/s RDIMMs in the same server?
The kit is rated at 5600 MT/s CL46; if slower 4800 MT/s modules are installed, the system will typically clock all channels down to the lowest common speed and latency.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
