Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR4 2400 CL17 ECC RDIMM ROMED8-2T AMD EPYC memory upgrade

SKU CH-DJP5-GTD0R

64 GB DDR4-2400 ECC RDIMM kit (2 × 32 GB, CL17, 1.2 V) validated for ASRock Rack ROMED8-2T AMD EPYC servers

  • Capacity64GB (2 x 32GB)
  • SpeedDDR4 2400 (PC4 19200)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V

Capacity 64GB 2X32GB

  • 64 GB total capacity for high-density server workloads
  • ECC registered design protects data integrity in critical applications
  • CL17 latency at DDR4 2400 MHz for responsive performance
  • 2 V operation reduces power draw across dual modules
  • Validated for ASRock Rack ROMED8-2T AMD EPYC platforms

System-specific DDR4 ECC kit

This 64GB kit contains two 32GB registered DIMMs built for the ASRock Rack ROMED8-2T motherboard. It targets administrators who need validated memory for AMD EPYC server platforms. The modules operate at DDR4 2400 with a CL17 latency. Each stick uses a 2Rx4 organisation and runs at 1.2V.

Registered 288-pin RDIMM build

The modules are registered ECC RDIMMs with a standard 288-pin DDR4 interface. They carry no heat spreader, keeping the profile low for dense server chassis. Major OEM chips from Samsung, Micron or Hynix are used throughout. The registered buffer reduces electrical load on the memory controller in multi-DIMM configurations.

2400 MT/s CL17 at 1.2V

The decisive specification is the DDR4 2400 (PC4-19200) speed grade combined with CL17 timing at 1.2V. This matches the ROMED8-2T qualified voltage and frequency window. Systems requiring a different data rate or lower latency will not meet the motherboard's validated memory list.

I korthet

  • 64 GB total capacity for high-density server workloads
  • ECC registered design protects data integrity in critical applications
  • CL17 latency at DDR4 2400 MHz for responsive performance
  • 2 V operation reduces power draw across dual modules
  • Validated for ASRock Rack ROMED8-2T AMD EPYC platforms

Specifikationer

BrandNEMIX RAM
SeriesASRock Server Motherboard Compatible Series Memory
ModelASRock DDR4 2666MHZ ECC RDIMM Registered Server Memory
Part NumberMR19200-324K2
Capacity64GB (2 x 32GB)
SpeedDDR4 2400 (PC4 19200)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemASRock
CAS LatencyCL17
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (2X32GB) DDR4 2400MHZ PC4-19200 2Rx4 1.2V CL17 288-PIN ECC RDIMM Registered Server Memory KIT

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Does this kit run at DDR4 2400 with CL17 timing on the ROMED8-2T?

Yes, the kit is rated DDR4 2400 PC4-19200 CL17 and is validated for the ASRock Rack ROMED8-2T AMD EPYC motherboard.

Will these 288-pin RDIMMs fit the ROMED8-2T DIMM slots without a heat spreader?

The modules are standard 288-pin DDR4 RDIMMs with no heat spreader, matching the ROMED8-2T slot layout and low-profile clearance.

Do I need to populate specific channels for the 2Rx4 registered ECC modules to initialise?

Install one module per channel in the order shown in the ROMED8-2T manual; the common mistake is skipping a channel and leaving the controller unbalanced.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.