Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Two green 288-pin DDR5 RDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5 4800 ECC RDIMM Cisco UCS X210c M7 memory upgrade

SKU CH-NPXP-3TQKA

A 64 GB DDR5 ECC registered server memory kit with two 32 GB modules rated at 4800 MT/s, CL40 latency and 1.10 V, validated for the Cisco UCS X210c M7 compute node

  • Capacity64GB (2 x 32GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 64 GB total capacity from two 32 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered design protects data integrity under load
  • 10 V operation lowers power draw per module
  • Qualified for Cisco UCS X210c M7 compute nodes

Cisco UCS X210c M7 DDR5 upgrade

This 64 GB kit contains two 32 GB DDR5 4800 registered ECC RDIMMs built for the Cisco UCS X210c M7 compute node. Each module runs at 1.1 V with CL40 timing and a 1Rx4 organisation. The 288-pin form factor matches the server's memory slots exactly.

Buyers who need registered ECC memory for this

The kit suits administrators expanding a UCS X210c M7 with validated DDR5 RDIMMs. It is not for systems that require unbuffered UDIMMs, non-ECC modules or a different DDR generation. Builders needing lower latency, higher frequency or a different pin count should look at other memory types.

288-pin DDR5 RDIMM form factor

The 288-pin registered DIMM interface is the single specification that determines fit. Only platforms wired for DDR5 RDIMM sockets can accept these modules; any other memory slot will not work.

I korthet

  • 64 GB total capacity from two 32 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered design protects data integrity under load
  • 10 V operation lowers power draw per module
  • Qualified for Cisco UCS X210c M7 compute nodes

Specifikationer

BrandNEMIX RAM
SeriesCisco Server Compatible Series Memory
ModelCisco DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-314K2
Capacity64GB (2 x 32GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemCisco
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (2X32GB) DDR5 4800MHZ PC5-38400 1Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Frågor om den här produkten

What bandwidth does the DDR5 4800 (PC5-38400) interface provide?

The DDR5 4800 (PC5-38400) interface provides a data rate of 4800 MT/s with a PC5-38400 designation.

What physical slot and clearance does the 288-pin DDR5 RDIMM need?

Each 32 GB module uses a standard 288-pin DDR5 RDIMM form factor with no heat spreader, so it fits any compatible Cisco UCS X210c M7 DIMM slot without extra clearance.

How are the two 32 GB modules installed in the Cisco UCS X210c M7, and what step is often missed?

Power down the node, open the chassis, align each 288-pin module with the keyed slot, press firmly until the ejector tabs click, then verify in BIOS that both 32 GB modules are recognised as a 64 GB kit at 4800 MT/s.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.