BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00276796BTC
I lager
NEMIX RAM
NEMIX RAM 64GB (4x16GB) DDR4 2666 ECC RDIMM 1Rx4 CL19 288-Pin Synology SA3400 memory upgrade
A 64 GB kit of four 16 GB DDR4 2666 ECC registered DIMMs with CL19 latency for Synology SA3400 NAS
- Capacity64GB (4 x 16GB)
- SpeedDDR4 2666 (PC4 21300)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- ECC protection prevents data corruption in Synology SA3400 NAS
- Registered DDR4 2666 modules deliver 64 GB across four 16 GB DIMMs
- CL19 latency at 1.20 V balances speed with server stability
- 288-pin RDIMM form factor installs directly in compatible Synology bays
- Built with Samsung Micron Hynix chips for enterprise-grade reliability
Synology SA3400 memory kit
This 64 GB kit contains four 16 GB DDR4 2666 ECC registered DIMMs built for the Synology SA3400 NAS. Each module runs at 1.2 V with CL19 latency and a 1Rx4 organisation. The registered design adds a buffer that helps maintain signal integrity on the server motherboard.
Compatibility and slot check
Verify that your SA3400 has four free 288-pin DDR4 slots and that the system firmware supports registered ECC memory at this speed. The modules are not interchangeable with unbuffered or non-ECC DIMMs used in desktop boards. Mixing registered and unbuffered memory will prevent the system from booting.
Build quality and daily handling
Samsung, Micron or Hynix chips are used throughout the kit and every module is stress tested under load before shipping. The bare green PCB has no heat spreader, so keep airflow over the slots clear during operation. Handle the modules by the edges only and seat them firmly until the retention clips click.
I korthet
- ECC protection prevents data corruption in Synology SA3400 NAS
- Registered DDR4 2666 modules deliver 64 GB across four 16 GB DIMMs
- CL19 latency at 1.20 V balances speed with server stability
- 288-pin RDIMM form factor installs directly in compatible Synology bays
- Built with Samsung Micron Hynix chips for enterprise-grade reliability
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | Synology Compatible Series NAS Memory |
| Model | Synology DDR4 2666MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR21300-614K4 |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Synology |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 1Rx4 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 64GB (4X16GB) DDR4 2666MHZ PC4-21300 1Rx4 1.2V CL19 288-PIN ECC RDIMM Registered Server Memory KIT |
Frågor om den här produkten
Does the 64GB kit contain four 16GB modules or do I need to buy additional DIMMs?
The kit ships as four 16GB DDR4 2666 ECC RDIMM modules for a total of 64GB, so no extra DIMMs are required.
Should I choose the 1Rx4 CL19 registered version or a different rank and latency for my Synology SA3400?
The SA3400 is validated with 1Rx4 CL19 registered modules at 2666 MT/s; this exact configuration matches the vendor qualification list.
What does the 2666 MT/s rating mean once the memory is installed in the SA3400?
The NAS memory controller will run the kit at its rated 2666 MT/s, delivering PC4-21300 bandwidth with ECC error correction for data integrity.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
