BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.0027834BTC
I lager
NEMIX RAM
NEMIX RAM 64GB (4x16GB) DDR5 5600 CL46 1Rx8 1.10V UDIMM Supermicro BH4SR2-25G
A 64 GB DDR5 kit of four 16 GB unbuffered UDIMMs at 5600 MT/s, CL46, 1.10 V, validated for Supermicro BH4SR2-25G motherboards
- Capacity64GB (4 x 16GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64 GB kit gives ample capacity for demanding workloads
- DDR5 5600 speed delivers high bandwidth for data-intensive tasks
- CL46 latency supports responsive system operation
- 10 V operation reduces power draw and heat
- Validated for Supermicro BH4SR2-25G motherboard ensures reliable compatibility
Supermicro BH4SR2-25G DDR5 memory kit
This 64 GB kit contains four 16 GB unbuffered DDR5 UDIMMs built for the Supermicro BH4SR2-25G motherboard. The modules run at 5600 MT/s with a CAS latency of CL46 and operate at the standard 1.10 V. No heat spreaders are fitted, keeping the profile low for dense chassis.
Builders upgrading a Supermicro BH4SR2-25G
The kit suits administrators who need 64 GB of standard-voltage DDR5 for this specific board. Buyers who need ECC error correction, registered modules or speeds above 5600 MT/s should look elsewhere because this memory is non-ECC and unbuffered. Systems requiring more than four DIMM slots also cannot use this exact configuration.
DDR5 5600 CL46 1.10 V specification
The decisive figure is the DDR5 5600 CL46 timing at 1.10 V because the Supermicro BH4SR2-25G validates this exact speed and latency combination. Modules rated for different voltages, higher latencies or other DDR generations will not seat or will fall back to lower speeds. This kit matches the board’s qualified profile directly.
I korthet
- 64 GB kit gives ample capacity for demanding workloads
- DDR5 5600 speed delivers high bandwidth for data-intensive tasks
- CL46 latency supports responsive system operation
- 10 V operation reduces power draw and heat
- Validated for Supermicro BH4SR2-25G motherboard ensures reliable compatibility
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (4 x 16GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Frågor om den här produkten
Will these 288-pin DDR5 modules fit the four DIMM slots on my Supermicro BH4SR2-25G board?
Yes, the kit is built as a 4 x 16 GB DDR5 5600 UDIMM set that matches the 288-pin layout of the Supermicro BH4SR2-25G motherboard.
What is the correct way to seat all four sticks so the system posts at 5600 MHz CL46?
Insert each module into the designated DDR5 slots until the retention clips click, then enable the 5600 MT/s profile in BIOS; the common mistake is leaving one stick partially seated.
If a module fails years from now, what replacement does the lifetime warranty cover?
The lifetime replacement warranty provides an identical 16 GB DDR5 5600 1Rx8 1.10 V UDIMM for any defective stick in the kit.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
