BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00276429BTC
I lager
NEMIX RAM
NEMIX RAM 64GB 4x16GB DDR5 5600 CL46 1Rx8 ECC RDIMM Supermicro H13DSG-O-CPU memory upgrade
64GB kit of four 16GB DDR5 5600 CL46 ECC RDIMM modules at 1.1V for Supermicro H13DSG-O-CPU
- Capacity64GB (4 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 64 GB total capacity from four 16 GB modules for full server memory population
- DDR5 5600 speed with CL46 latency matches the motherboard rated timing
- Registered ECC design corrects single-bit errors and buffers signals for stable full-load operation
- 1 V operation at 1Rx8 rank aligns with the Supermicro H13DSG-O-CPU memory controller
- 288-pin RDIMM form factor fits the board's registered DIMM slots exactly
Exact-match upgrade for Supermicro H13DSG-O-CPU
This 64GB kit delivers four 16GB DDR5 RDIMMs rated at 5600MHz with CL46 latency and 1.1V operation. The 1Rx8 registered ECC modules match the memory controller expectations for the specified motherboard, ensuring full capacity recognition and rated speed. It is built for servers that require registered DDR5 memory with error correction.
Registered ECC architecture for enterprise stability
Registered buffering offloads the memory controller so all slots can run fully populated at the rated 5600MHz. On-die ECC catches and corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots in production workloads. The 288-pin RDIMM form factor fits only boards designed for registered DDR5 modules.
Replaces mixed-capacity or non-ECC configurations
The kit upgrades systems running slower DDR5 speeds, unbuffered DIMMs, or mismatched ranks that limit population rules. The jump is worth it when the motherboard manual confirms 1Rx8 registered DDR5 support and the workload demands maximum slot utilisation with error correction. Buyers needing UDIMM, SODIMM, or non-ECC memory cannot use this product.
I korthet
- 64 GB total capacity from four 16 GB modules for full server memory population
- DDR5 5600 speed with CL46 latency matches the motherboard rated timing
- Registered ECC design corrects single-bit errors and buffers signals for stable full-load operation
- 1 V operation at 1Rx8 rank aligns with the Supermicro H13DSG-O-CPU memory controller
- 288-pin RDIMM form factor fits the board's registered DIMM slots exactly
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 64GB 4X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Frågor om den här produkten
What speed does the DDR5 5600 PC5-44800 rating cap the modules at in practice?
The kit is rated for DDR5 5600 (PC5-44800) with CL46 latency at 1.10 V; the memory controller will run them at up to 5600 MT/s when the platform supports that speed.
What physical slot and form factor do these 288-pin RDIMMs need on the Supermicro H13DSG-O-CPU?
They require standard 288-pin DDR5 RDIMM slots; the board must accept registered ECC DIMMs, not UDIMM or SODIMM variants.
How are the four 16 GB modules installed, and which population step is often missed?
Populate all four slots following the motherboard manual's approved DIMM population order; the step most often missed is verifying the exact slot sequence for full-capacity operation.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
