Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green rectangular circuit board with gold edge connectors and black memory chips, no heat spreader

NEMIX RAM

NEMIX RAM 64GB DDR5 4800 2Rx4 CL40 ECC RDIMM memory upgrade

SKU CH-18BV-PMH4Z

A 64 GB DDR5 4800 registered ECC RDIMM module with CL40 latency and 1.1 V operation for Micron-compatible servers

  • Capacity64GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 64 GB capacity handles large server workloads
  • DDR5 4800 speed delivers high data throughput
  • ECC registered design protects data integrity
  • 1 V operation reduces power consumption
  • 2Rx4 288-pin RDIMM fits compatible Micron systems

64GB DDR5 ECC RDIMM for Micron servers

This 64GB DDR5 module runs at 4800MT/s with CL40 latency and 1.1V operation. It uses a 2Rx4 registered ECC design on a 288-pin form factor for Micron server and workstation platforms. The registered buffer and error-correcting code protect data integrity in multi-socket environments.

Sustained throughput with registered ECC stability

Registered buffering reduces electrical load on the memory controller during continuous heavy workloads. ECC corrects single-bit errors on the fly, preventing silent data corruption during long compute jobs. The 4800MT/s rate and CL40 timing deliver consistent bandwidth without the voltage spikes seen in unbuffered consumer modules.

Direct slot insertion, verify RDIMM support first

The module installs like any standard 288-pin DIMM; align the key notch and press until the retention clips engage. No heat spreader is present, so airflow across the PCB is essential in dense chassis. Systems that require UDIMM or LRDIMM will not accept this RDIMM, and mixing registered with unbuffered modules prevents boot.

I korthet

  • 64 GB capacity handles large server workloads
  • DDR5 4800 speed delivers high data throughput
  • ECC registered design protects data integrity
  • 1 V operation reduces power consumption
  • 2Rx4 288-pin RDIMM fits compatible Micron systems

Specifikationer

BrandNEMIX RAM
SeriesMicron Server/Workstaion Compatible Series Memory
ModelMicron DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-924K1
Capacity64GB
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemMICRON
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (1X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

Frågor om den här produkten

How much power does the 1.1 V DDR5 4800 module draw under sustained server load?

The module operates at 1.1 V, the standard DDR5 voltage, which reduces power draw compared with previous DDR generations while maintaining 4800 MT/s throughput.

What motherboard slot and firmware support are required to run this 288-pin ECC RDIMM?

A server or workstation board with a DDR5 288-pin RDIMM slot and BIOS that enables ECC and registered memory operation is required.

Will this CL40 2Rx4 registered DIMM work in a system that currently uses unbuffered DDR5?

No — registered DIMMs need a motherboard chipset and memory controller designed for buffered operation; unbuffered consumer boards cannot use them.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.