BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00278135BTC
I lager
NEMIX RAM
NEMIX RAM 8GB (2x4GB) DDR3 1333 PC3-10600 2Rx8 1.35V 204-Pin SODIMM for POSIFLEX HC-1521P memory upgrade
8 GB DDR3 SODIMM kit for POSIFLEX HC-1521P terminal, 1333 MHz CL9, 1.35 V, 204-pin
- Capacity8GB (2 x 4GB)
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- Designed for POSIFLEX HC-1521P terminals for guaranteed fit
- 8 GB kit (2 × 4 GB) expands multitasking headroom
- DDR3 1333 PC3-10600 CL9 matches original spec
- Low-voltage 1.35 V modules reduce power draw
- Built with major-brand Samsung Micron Hynix chips
POSIFLEX HC-1521P memory kit
This 8 GB kit contains two 4 GB DDR3 SODIMM modules built for the POSIFLEX HC-1521P terminal. Each module runs at 1333 MHz with CL9 latency and 1.35 V operation. The 204-pin form factor fits the system's memory slots directly.
Suits service technicians upgrading that terminal
Technicians servicing a POSIFLEX HC-1521P can install this matched pair without configuration changes. Builders working on any other platform should look elsewhere because the kit is validated only for that specific terminal model.
2Rx8 organisation with major-brand chips
Each module uses a 2Rx8 rank layout populated with Samsung, Micron or Hynix components. That organisation determines whether the terminal's memory controller recognises the full 8 GB capacity.
I korthet
- Designed for POSIFLEX HC-1521P terminals for guaranteed fit
- 8 GB kit (2 × 4 GB) expands multitasking headroom
- DDR3 1333 PC3-10600 CL9 matches original spec
- Low-voltage 1.35 V modules reduce power draw
- Built with major-brand Samsung Micron Hynix chips
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-428K2 |
| Capacity | 8GB (2 x 4GB) |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (2X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT |
Frågor om den här produkten
What limits sustained throughput on this DDR3-1333 kit?
The 1333 MT/s data rate and CL9 latency set the bandwidth ceiling during continuous workloads.
How much heat and power does the 1.35 V kit produce all day?
Low-voltage 1.35 V operation keeps power draw and thermal output minimal in the POSIFLEX HC-1521P chassis.
Which slot type must the POSIFLEX HC-1521P already have for these modules?
The terminal needs two free 204-pin DDR3 SODIMM sockets to accept the 2Rx8 kit.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
