BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00278081BTC
I lager
NEMIX RAM
NEMIX RAM 8GB DDR3 1333MHz PC3-10600 1.35V 204-Pin SODIMM POSIFLEX PS-3315 memory upgrade
8GB DDR3 1333MHz SODIMM module designed for the POSIFLEX PS-3315 terminal
- Capacity8GB
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- Designed for POSIFLEX PS-3315 terminals
- 8GB DDR3 1333MHz boosts multitasking
- Low 1.35V voltage reduces power draw
- 204-pin SODIMM fits laptop-style slots
- Tested with major OEM chips for reliability
POSIFLEX PS-3315 memory upgrade
This 8 GB DDR3 SODIMM is built specifically for the POSIFLEX PS-3315 fanless touch-screen terminal. It delivers a single 8 GB module rated at 1333 MHz with CL9 latency for straightforward capacity expansion.
Fits 204-pin DDR3 SODIMM slots at 1.35 V
The unbuffered, non-ECC design installs directly into the terminal's memory socket without additional hardware or configuration changes. Low-voltage operation at 1.35 V reduces power draw while maintaining compatibility with the system's existing memory controller.
Suits technicians upgrading a PS-3315 unit
Buyers needing ECC error correction, registered modules, or speeds beyond 1333 MHz should look elsewhere. This module addresses only the stated terminal model and does not support other platforms or form factors.
I korthet
- Designed for POSIFLEX PS-3315 terminals
- 8GB DDR3 1333MHz boosts multitasking
- Low 1.35V voltage reduces power draw
- 204-pin SODIMM fits laptop-style slots
- Tested with major OEM chips for reliability
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-828K1 |
| Capacity | 8GB |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM |
Frågor om den här produkten
Will the 1.35V module run at its rated 1.50V in the POSIFLEX PS-3315 without overheating?
The SODIMM is specified at 1.50V; the POSIFLEX PS-3315 supplies that voltage, so sustained operation stays within the rated thermal envelope.
Does the unbuffered 2Rx8 design produce audible coil whine or excess heat during all-day POS workloads?
Non-ECC unbuffered DDR3 SODIMMs have no active cooling and draw only standard DDR3 power, so noise and heat remain negligible in a fanless terminal.
Is a DDR3 SODIMM slot with 204 pins already present in the PS-3315 for this upgrade?
The PS-3315 uses 204-pin DDR3 SODIMM sockets, so the module installs directly without adapters or additional hardware.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
