BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00281088BTC
I lager
NEMIX RAM
NEMIX RAM 8GB DDR3 1600 ECC UDIMM 1.35V 240-pin Dell PowerEdge R415 memory upgrade
8GB DDR3 1600 ECC UDIMM at 1.35V, 240-pin for Dell PowerEdge R415 servers
- Capacity8GB
- SpeedDDR3 1600 (PC3 12800)
- ECCYes
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.35V
- 8GB capacity expands Dell PowerEdge R415 memory headroom
- DDR3 1600 speed with CL11 latency boosts server throughput
- ECC unbuffered design detects and corrects data errors
- 35V low-voltage operation reduces system power draw
- 240-pin UDIMM form factor fits R415 DIMM slots directly
Dell PowerEdge R415 server upgrade
This 8 GB DDR3 1600 ECC UDIMM is built for the Dell PowerEdge R415 and runs at 1.35 V with CL11 timing. The single 240-pin module uses a 2Rx8 organisation and major OEM chips from Samsung, Micron or Hynix. It targets administrators who need to expand memory capacity on this specific platform.
Sustained load behaviour with ECC
Error-correcting code detects and corrects single-bit errors during continuous operation, protecting data integrity in long-running workloads. Unbuffered topology keeps latency low while the 1.35 V supply reduces power draw compared to standard 1.5 V modules. Rigorous stress testing under load verifies stability before shipment.
DDR3 interface practical limits
The DDR3 1600 (PC3-12800) interface caps bandwidth at the rated transfer rate, so total throughput scales with the number of populated slots. ECC adds one extra bit per byte, slightly increasing bus utilisation but not the peak frequency. Modules without heat spreaders rely on chassis airflow for thermal management.
I korthet
- 8GB capacity expands Dell PowerEdge R415 memory headroom
- DDR3 1600 speed with CL11 latency boosts server throughput
- ECC unbuffered design detects and corrects data errors
- 35V low-voltage operation reduces system power draw
- 240-pin UDIMM form factor fits R415 DIMM slots directly
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Server/Workstation Compatible Series Memory |
| Model | Dell DDR3 1600MHZ ECC Unbuffered UDIMM |
| Part Number | ME12800-828K1 |
| Capacity | 8GB |
| Speed | DDR3 1600 (PC3 12800) |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.35V |
| Compatible System | Dell |
| CAS Latency | CL11 |
| Heat Spreader | No |
| Type | 240-Pin DDR3 ECC UDIMM |
| Rank | 2Rx8 |
| Features | DDR3 1600MHZ ECC UDIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR3 1600MHZ PC3-12800 2Rx8 1.35V 240-PIN ECC Unbuffered UDIMM |
Frågor om den här produkten
How much power does the 1.35V DDR3 ECC UDIMM draw when the Dell PowerEdge R415 runs continuously?
The module operates at 1.35V, which is the low-voltage DDR3 standard, so it draws less power than 1.5V DDR3 under sustained load.
What must the Dell PowerEdge R415 already have for this 240-pin 2Rx8 module to work?
The server needs an available 240-pin DDR3 UDIMM slot that supports ECC unbuffered memory at 1600MHz and 1.35V operation.
Will this PC3-12800 CL11 stick run correctly alongside the original Samsung, Micron or Hynix chips already in my R415?
Yes, it uses the same major OEM chipsets and matches the 1600MHz speed, CL11 latency and 1.35V voltage for compatible mixed-population operation.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
