Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green 260-pin DDR4 SODIMM module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 CL22 260-Pin SODIMM POSIFLEX EK-2430 memory upgrade

SKU CH-DH42-0BN86

8GB DDR4 3200 SODIMM module validated for the POSIFLEX EK-2430 Mercury Series kiosk

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • Boosts POSIFLEX EK-2430 speed with 8GB DDR4 3200 module
  • Low 1.2V draw cuts power use in kiosk deployments
  • CL22 timing keeps response steady under transaction loads
  • 2Rx8 dual-rank layout fills one 260-pin SODIMM slot
  • Built from Samsung, Micron or Hynix chips for reliability

POSIFLEX EK-2430 compatible SODIMM

This 8 GB DDR4 3200 module is built for the POSIFLEX EK-2430 Mercury Series kiosk. It uses a 260-pin SODIMM form factor with CL22 latency and runs at 1.2 V. The unbuffered non-ECC design matches the original system specification for straightforward installation.

Sustained workload stability

Each module is stress tested under load before shipping to verify reliability in continuous operation. The 2Rx8 organisation and major OEM DRAM from Samsung Micron or Hynix provide consistent throughput during long shifts. CL22 timing and 1.2 V operation keep performance steady without voltage scaling.

Thermals noise and power

The module has no heat spreader and relies on the kiosk chassis airflow for cooling. At 1.20 V the power draw stays low so fan noise remains unchanged in normal use. Standard DDR4 SODIMM dimensions ensure it fits the existing slot without clearance issues.

I korthet

  • Boosts POSIFLEX EK-2430 speed with 8GB DDR4 3200 module
  • Low 1.2V draw cuts power use in kiosk deployments
  • CL22 timing keeps response steady under transaction loads
  • 2Rx8 dual-rank layout fills one 260-pin SODIMM slot
  • Built from Samsung, Micron or Hynix chips for reliability

Specifikationer

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-828K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

Frågor om den här produkten

How much power does the 1.2 V DDR4 3200 SODIMM draw during continuous operation in the POSIFLEX EK-2430?

The module operates at 1.20 V, the standard voltage for DDR4 SODIMMs, keeping power draw low during all-day use in the kiosk.

What must the POSIFLEX EK-2430 already provide for this 260-pin CL22 memory to function?

A DDR4 SODIMM slot that accepts 2Rx8 unbuffered non-ECC modules at 3200 MT/s is required; the EK-2430 supplies this natively.

Will the 2Rx8 organisation of this upgrade work with the existing memory configuration in the EK-2430?

The 2Rx8 rank layout is a standard DDR4 SODIMM organisation and matches the memory architecture used in the Mercury Series kiosk.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.