BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00279851BTC
I lager
NEMIX RAM
NEMIX RAM 8GB DDR4 3200 CL22 288-Pin UDIMM SuperMicro MBD-C9Z590-CGW memory upgrade
8 GB DDR4 3200 UDIMM module rated CL22 at 1.2 V for Supermicro MBD-C9Z590-CGW systems
- Capacity8GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 8 GB DDR4 3200 CL22 expands desktop capacity
- 2 V operation keeps power draw low
- 288-pin UDIMM fits SuperMicro MBD-C9Z590-CGW boards
- Major OEM chips from Samsung Micron Hynix ensure reliability
- Single-rank 1Rx8 layout simplifies memory configuration
8GB DDR4 module for SuperMicro MBD-C9Z590-CGW
This 8GB DDR4 3200 UDIMM is built for the SuperMicro MBD-C9Z590-CGW motherboard. It suits desktop workstations and gaming rigs that need a single 8GB stick. The module is non-ECC and unbuffered, matching the board's standard memory slots. Buyers who need ECC error correction or registered modules should look elsewhere.
Simple DIMM installation with manual guidance
The 288-pin UDIMM seats in the regular desktop DIMM slots without tools. Installation usually takes a few minutes if you follow the motherboard manual for slot population order. A common mistake is mixing this CL22 stick with modules of different latency or voltage, which can prevent the system from posting. Ensure all slots run at 1.2V for stability.
CL22 latency at 1.2V defines compatibility
The decisive specification is CAS latency 22 at 1.2V operating voltage. The board's memory controller expects this timing and voltage combination for reliable operation at 3200 MT/s. If your existing memory runs at a different latency or voltage, the system may downclock or fail to boot. Match these values exactly when adding this module.
I korthet
- 8 GB DDR4 3200 CL22 expands desktop capacity
- 2 V operation keeps power draw low
- 288-pin UDIMM fits SuperMicro MBD-C9Z590-CGW boards
- Major OEM chips from Samsung Micron Hynix ensure reliability
- Single-rank 1Rx8 layout simplifies memory configuration
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR4 3200MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD25600-818K1 |
| Capacity | 8GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM |
Frågor om den här produkten
How can I confirm the module is running at 3200 MT/s with CL22 after installation?
Check the memory speed and CAS latency in the BIOS or UEFI setup, or use a system information tool such as CPU-Z to verify DDR4 3200 and CL22 timings.
What does the package contain and is anything else required for installation?
The box includes one 8 GB 288-pin DDR4 UDIMM; no extra components are needed — just an available DIMM slot on the SuperMicro MBD-C9Z590-CGW motherboard.
Which capacity should I choose if the board has four slots and I want 32 GB total?
Populate all four slots with 8 GB modules (4 × 8 GB) to reach 32 GB while keeping the 1Rx8 rank configuration supported by the MBD-C9Z590-CGW.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
