Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green circuit board SODIMM module with black memory chips, 260-pin edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 CL22 2Rx8 1.2V 260-pin SODIMM POSIFLEX EK-2452 memory upgrade

SKU CH-GVVD-Q99D9

8 GB DDR4 3200 SODIMM module for POSIFLEX EK-2452 kiosks, CL22 2Rx8 unbuffered at 1.2 V

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8 GB capacity expands kiosk multitasking headroom
  • DDR4 3200 speed matches POSIFLEX EK-2452 spec
  • CL22 latency at 1.2 V keeps power draw low
  • 260-pin SODIMM fits Mercury Series slot directly
  • Major OEM chips validated under load for stability

8 GB DDR4 3200 SODIMM for POSIFLEX EK-2452

This module is an 8 GB DDR4 3200 CL22 2Rx8 1.2 V 260-pin SODIMM built for the POSIFLEX EK-2452 Mercury Series kiosk. It uses unbuffered non-ECC chips from major OEM suppliers and carries the part number MS25600-828K1. The stick installs in the standard SODIMM slot without tools.

Suits kiosk operators upgrading a single slot

The part fits owners of the POSIFLEX EK-2452 who need to replace a failed module or increase capacity in one slot. It does not suit systems that require ECC, registered DIMMs, 288-pin desktop DIMMs or a different voltage. Buyers with laptops or servers using other form factors should look elsewhere.

Deciding spec is 260-pin DDR4 SODIMM at 1.2 V

The single specification that determines compatibility is the 260-pin DDR4 SODIMM interface running at 1.2 V. If the target machine accepts that exact module type the upgrade will work; if it demands a different pin count, voltage or DDR generation the module will not fit or function.

I korthet

  • 8 GB capacity expands kiosk multitasking headroom
  • DDR4 3200 speed matches POSIFLEX EK-2452 spec
  • CL22 latency at 1.2 V keeps power draw low
  • 260-pin SODIMM fits Mercury Series slot directly
  • Major OEM chips validated under load for stability

Specifikationer

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-828K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

Frågor om den här produkten

What slot and pin count does this module need in the POSIFLEX EK-2452?

It fits a DDR4 260-pin SODIMM slot, the standard socket used by the EK-2452 motherboard.

Which way round does the 2Rx8 module go in, and what clicks to confirm it is seated?

Align the notch on the gold edge with the key in the slot, push in at an angle, then press down until the side clips snap into the notches on the PCB.

When should I expect to replace this 1.2 V CL22 stick in a kiosk running 24/7?

DDR4 SODIMMs have no moving parts; plan replacement only if memory errors appear or a future BIOS update demands higher speed or capacity.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.