Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green circuit board with black memory chips, no heat spreader, 288 gold pins

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 CL22 UDIMM for ASRock B660M PG Riptide Phantom Gaming 4 Pro RS ProRSax memory upgrade

SKU CH-3K9H-P55Q8

8GB DDR4 3200 CL22 UDIMM module validated for ASRock B660M motherboards

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8 GB capacity adds multitasking headroom for daily workloads
  • DDR4 3200 speed moves data quickly through the system
  • CL22 latency keeps response times tight under load
  • 2 V operation reduces power draw and heat output
  • Validated for ASRock B660M boards to ensure trouble-free installation

Targeted DDR4 Upgrade

This 8 GB module is built for ASRock B660M PG Riptide, Phantom Gaming 4, Pro RS and ProRSax motherboards. It suits owners of those boards who need a single, validated stick to add capacity without guessing compatibility.

Decisive Specification

The kit runs at DDR4 3200 with a CL22 latency at 1.20 V in a 1Rx8 unbuffered layout. That exact speed, voltage and rank combination is what the listed ASRock boards expect, so the module will train at the rated frequency without manual tuning.

Build Integration

The 288-pin UDIMM drops into any free DDR4 slot on the supported boards and requires no heat spreader clearance. It leaves all other slots open for further expansion and draws standard DDR4 power from the motherboard without extra cables or cooling.

I korthet

  • 8 GB capacity adds multitasking headroom for daily workloads
  • DDR4 3200 speed moves data quickly through the system
  • CL22 latency keeps response times tight under load
  • 2 V operation reduces power draw and heat output
  • Validated for ASRock B660M boards to ensure trouble-free installation

Specifikationer

BrandNEMIX RAM
SeriesASRock Gaming Motherboard Compatible Series Memory
ModelASRock DDR4 3200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD25600-818K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemASRock
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM

Frågor om den här produkten

What does the 3200 MT/s rating mean once the module is installed in the ASRock B660M board?

The module runs at DDR4 3200 (PC4-25600) speed with CL22 latency at 1.20 V, delivering the rated throughput when the motherboard enables the matching JEDEC profile.

How does the DDR4 UDIMM interface limit performance on this platform?

The 288-pin unbuffered DDR4 connection caps transfer rate at the 3200 MT/s JEDEC ceiling; no higher DDR4 speeds or DDR5 signalling are possible on this socket.

What physical slot and clearance does the stick need to fit the B660M PG Riptide?

It requires a standard 288-pin DDR4 UDIMM slot and has no heat spreader, so it fits under most CPU coolers without height interference.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.