Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Two green DDR5 UDIMM modules, black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 96GB (2x48GB) DDR5 5600 CL46 1.1V 288-pin UDIMM SuperMicro memory upgrade

SKU CH-YKGT-J5YCG

A 96 GB kit of two 48 GB DDR5 5600 CL46 UDIMMs at 1.1 V for Supermicro workstations

  • Capacity96GB (2 x 48GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 96GB 2X48GB

  • 96 GB kit (2 × 48 GB) for high-capacity workloads
  • DDR5 5600 MT/s speed for fast data throughput
  • CL46 latency at 1.10 V for efficient operation
  • 288-pin UDIMM form factor fits Supermicro desktop workstations
  • 2Rx8 dual-rank organisation maximises memory density

NEMIX RAM 96GB DDR5 5600 Kit

This 96GB kit provides two 48GB DDR5 5600 modules built for SuperMicro desktop workstations. The CL46 latency and 1.1V operation suit memory-intensive workloads on compatible boards. Unbuffered non-ECC design matches the requirements of the specified SuperMicro platform.

Tool-free DIMM installation

Installation follows standard UDIMM procedure: align the notch, press until the retention clips engage, and verify seating. The 2Rx8 organisation and 288-pin layout require a motherboard that supports 48GB density per slot; systems limited to lower densities will not recognise the full capacity.

DDR5 5600 interface limits

The PC5-44800 rating sets the maximum transfer rate at 5600 MT/s; actual throughput depends on the memory controller and BIOS configuration. CL46 timing is fixed for this kit and cannot be tightened without stability risk. Non-ECC unbuffered operation means no error correction for mission-critical data integrity.

I korthet

  • 96 GB kit (2 × 48 GB) for high-capacity workloads
  • DDR5 5600 MT/s speed for fast data throughput
  • CL46 latency at 1.10 V for efficient operation
  • 288-pin UDIMM form factor fits Supermicro desktop workstations
  • 2Rx8 dual-rank organisation maximises memory density

Specifikationer

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 5600MHZ Non-ECC Unbuffered UDIMM
Part NumberMD44800-4828K2
Capacity96GB (2 x 48GB)
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank2Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content96GB (2X48GB) DDR5 5600MHZ PC5-44800 2Rx8 1.1V CL46 288-PIN Non-ECC Unbuffered UDIMM KIT

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

How can I confirm the kit is running at DDR5 5600 CL46 after installation?

Check the memory speed and timings in the BIOS or UEFI; the modules should report DDR5 5600 (PC5-44800) with CAS latency 46 at 1.1 V.

What does the package contain and is anything else required?

The kit includes two 48 GB 288-pin DDR5 UDIMM modules (96 GB total); no heat spreader is fitted and no extra components are needed for installation.

Which capacity option should I choose for a Supermicro C9Z790-CGW workstation?

This 96 GB kit (2 x 48 GB) is the listed configuration validated for the Supermicro C9Z790-CGW; select it when you need the full 96 GB capacity.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.