Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green printed circuit board with black memory chips on both sides gold edge connector no heat spreader

NEMIX RAM

NEMIX RAM 96GB DDR5 5600 CL46 2Rx4 1.1V ECC RDIMM memory upgrade for Supermicro H13SVW-N

SKU CH-P83X-NX087

96GB DDR5 5600 Registered ECC RDIMM with CL46 latency and 1.1V operation, validated for Supermicro H13SVW-N motherboards

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB

Visa 12 fler konfigurationer

Speed 5600MHz

  • Exact DDR5-5600 96GB RDIMM matches Supermicro H13SVW-N spec for full-speed operation
  • Registered ECC 2Rx4 1.1V design keeps every slot stable at full capacity
  • CL46 latency and PC5-44800 bandwidth deliver rated throughput without tuning
  • 288-pin RDIMM form factor fits the board's required registered memory slots
  • Lifetime replacement warranty with US-based technical support included

96 GB DDR5-5600 ECC RDIMM for Supermicro H13SVW-N

This 96 GB DDR5 5600 (PC5-44800) registered ECC module is built for the Supermicro H13SVW-N motherboard. It runs at 1.1 V with CL46 latency in a 2Rx4 288-pin RDIMM form factor. The registered design lets the board run fully populated at rated speed without downclocking. Major-brand Samsung, Micron or Hynix chips provide enterprise-grade stability.

Upgrades from slower DDR5 or non-ECC DIMMs

Replacing lower-speed DDR5 or unbuffered memory with this CL46 5600 MHz kit restores the bandwidth and error correction the platform expects. The jump is worth it when your workload needs full-capacity population across all slots and silent data-corruption protection. Systems limited to UDIMM or SODIMM form factors cannot accept this module.

Suits admins running fully populated Supermicro

This kit suits administrators who need a verified 96 GB registered ECC DIMM that matches the board's population rules and voltage profile. Builders using consumer motherboards, laptops or any platform that requires unbuffered DIMMs should look elsewhere. Buyers who need heat spreaders or RGB lighting will not find them here.

I korthet

  • Exact DDR5-5600 96GB RDIMM matches Supermicro H13SVW-N spec for full-speed operation
  • Registered ECC 2Rx4 1.1V design keeps every slot stable at full capacity
  • CL46 latency and PC5-44800 bandwidth deliver rated throughput without tuning
  • 288-pin RDIMM form factor fits the board's required registered memory slots
  • Lifetime replacement warranty with US-based technical support included

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Does the 288-pin RDIMM module fit the Supermicro H13SVW-N motherboard DIMM slots?

Yes, the 288-pin DDR5 RDIMM form factor matches the registered DIMM slots required by the Supermicro H13SVW-N motherboard.

What is the correct installation sequence for the 2Rx4 96GB DDR5 5600 ECC RDIMM in the Supermicro H13SVW-N?

Follow the motherboard manual's DIMM population order; install modules in the specified slot sequence for the 2Rx4 registered ECC configuration to be recognised at full 96GB capacity.

Will the 1.1V DDR5 5600 CL46 ECC RDIMM require any firmware updates or component replacements during its service life?

The module operates at the standard 1.1V DDR5 voltage with on-die ECC; no firmware updates or component replacements are needed for the memory itself under normal server operation.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.