VERBATIM
VERBATIM 49067 PinStripe USB 2.0 16GB flash drive Hot Pink
- USB 2.0
- Pink
7,99 US$
0.0001027BTC
I lager
NEMIX RAM
NEMIX RAM 96GB DDR5 6400 CL52 2Rx4 1.1V ECC RDIMM Supermicro H13SSW memory upgrade
96GB DDR5 6400 ECC RDIMM with CL52 latency and 1.1V operation, registered 2Rx4 design validated for Supermicro H13SSW motherboards
- Capacity96GB
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 96 GB DDR5 capacity lets your Supermicro H13SSW handle large workloads without swapping
- 6400 MT/s speed with CL52 latency delivers rated throughput the memory controller expects
- Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
- 1 V operation at 2Rx4 rank matches the board's voltage and population rules exactly
- 288-pin RDIMM form factor fits the H13SSW slots — no UDIMM or SODIMM confusion
96GB DDR5-6400 ECC RDIMM upgrade
This 96GB DDR5-6400 (PC5-51200) Registered ECC RDIMM is an exact-match upgrade for the Supermicro H13SSW motherboard. It runs at 1.1V with CL52 latency and a 2Rx4 organisation, delivering the precise rank, voltage and timing the memory controller expects for full-capacity operation.
Verify motherboard memory rules before ordering
Consult the Supermicro H13SSW manual for supported capacities, approved DIMM population order and installation steps. The board requires 288-pin Registered RDIMMs, not UDIMMs or SODIMMs, and population rules vary by configuration.
Registered ECC architecture protects data integrity
The registered (buffered) design offloads the memory controller so every slot runs fully populated at rated speed, while ECC catches and corrects single-bit errors on the fly to prevent silent data corruption and unplanned reboots.
I korthet
- 96 GB DDR5 capacity lets your Supermicro H13SSW handle large workloads without swapping
- 6400 MT/s speed with CL52 latency delivers rated throughput the memory controller expects
- Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
- 1 V operation at 2Rx4 rank matches the board's voltage and population rules exactly
- 288-pin RDIMM form factor fits the H13SSW slots — no UDIMM or SODIMM confusion
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K1 |
| Capacity | 96GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Frågor om den här produkten
Does the 96GB kit include anything besides the DDR5 6400 CL52 2Rx4 1.1V 288-pin ECC RDIMM module?
The package contains the 96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM kit; no additional cables, brackets or software are supplied.
Why choose the 96GB DDR5 6400 CL52 2Rx4 1.1V ECC RDIMM over a lower-capacity or different-rank module for the Supermicro H13SSW?
This exact-match 96GB 2Rx4 registered ECC DIMM meets the H13SSW's voltage, rank and timing requirements so the memory controller recognises the full capacity at the rated 6400 MT/s.
What does the DDR5 6400 (PC5-51200) rating mean once the module is installed in the Supermicro H13SSW?
The module runs at 6400 MT/s with CL52 latency at 1.1V, delivering the bandwidth and error-correction the H13SSW's memory controller expects for stable server operation.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
