Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green circuit board with black memory chips, gold edge connectors, no heat spreader

NEMIX RAM

NEMIX RAM CSE-510FT-203B 32GB DDR5 4800 CL40 memory upgrade

SKU CH-N455-2G3RQ MPN CSE-510FT-203B

A 32 GB DDR5 4800 CL40 UDIMM module built for SuperMicro IoT SuperServer SYS-111AD-HN2 systems

  • Capacity32GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 32 GB capacity expands multitasking headroom for demanding workloads
  • DDR5 4800 speed delivers high bandwidth for data-intensive applications
  • 1 V operation reduces power draw and thermal output
  • 2Rx8 dual-rank layout maximises density within a single module
  • Validated for SuperMicro SYS-111AD-HN2 ensures plug-in compatibility

NEMIX RAM 32GB DDR5 4800 UDIMM for Supermicro

This 32GB DDR5 4800 module is built for the Supermicro IoT SuperServer SYS-111AD-HN2 motherboard. It runs at PC5-38400 speed with CL40 latency and 1.10V voltage. The single 288-pin UDIMM uses a 2Rx8 organisation without ECC or heat spreader.

Who this suits and who should look elsewhere

It fits administrators upgrading that specific Supermicro platform who need non-ECC unbuffered memory. Buyers who require ECC error correction, registered modules, lower latency timings or a different pin count should look elsewhere. The part is validated only for the named system.

The specification that decides fit

The decisive figure is the 288-pin DDR5 UDIMM form factor combined with non-ECC unbuffered operation at 4800 MT/s. If the target board demands ECC, registered DIMMs or a different DDR generation this module will not work.

I korthet

  • 32 GB capacity expands multitasking headroom for demanding workloads
  • DDR5 4800 speed delivers high bandwidth for data-intensive applications
  • 1 V operation reduces power draw and thermal output
  • 2Rx8 dual-rank layout maximises density within a single module
  • Validated for SuperMicro SYS-111AD-HN2 ensures plug-in compatibility

Specifikationer

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ Non-ECC Unbuffered UDIMM
Part NumberMD38400-328K1
Capacity32GB
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank2Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (1X32GB) DDR5 4800MHZ PC5-38400 2Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM

Frågor om den här produkten

Will this DDR5 4800 CL40 32GB module run correctly in my SuperMicro SYS-111AD-HN2 alongside existing DDR5 memory?

This module is validated for the SuperMicro SYS-111AD-HN2 (model CSE-510FT-203B) and runs at DDR5 4800 with CL40 timings at 1.1V. Mixing modules of different speeds or latencies will force all memory to operate at the slowest common settings.

How can I confirm the module is operating at DDR5 4800 CL40 after installation?

Enter the system BIOS or use a tool such as CPU-Z. The memory should report 4800 MT/s (PC5-38400), CL40 CAS latency, 1.10V voltage, and 2Rx8 organisation for the installed 32GB capacity.

Does the package include only the 288-pin UDIMM or are extra items such as a heat spreader supplied?

The box contains a single 32GB 288-pin DDR5 UDIMM (1×32GB). No heat spreader, cables, or additional accessories are included.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.