Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Six green DDR5 RDIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 288GB (6×48GB) 4800 CL40 1.1V ECC RDIMM Supermicro H13SVW-NT-OS1 memory upgrade

SKU CH-A0MV-Z7X8C

Six 48 GB DDR5 RDIMMs deliver 288 GB of registered ECC memory at 4800 MHz CL40 1.1 V for the Supermicro H13SVW-NT-OS1 motherboard

  • Capacity288GB (6 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 288GB 6X48GB

Visa 12 fler konfigurationer
  • 288 GB total capacity scales memory-heavy workloads with six 48 GB modules
  • DDR5 4800 speed delivers rated bandwidth for the Supermicro H13SVW-NT-OS1 platform
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 10 V operation matches the board's voltage requirement for reliable POST
  • CL40 latency meets the exact timing specification the memory controller expects

Exact DDR5 288GB kit for Supermicro H13SVW-NT-OS1

This 6×48GB registered ECC RDIMM kit delivers 288GB total capacity at DDR5-4800 speed with CL40 timing and 1.1V operation. The modules use a 2Rx8 organisation and 288-pin form factor that the board's memory controller expects. It is built for servers that require full-population stability and error correction.

Verify motherboard population rules and slot order

Consult the Supermicro H13SVW-NT-OS1 manual for supported capacities per channel, approved DIMM installation sequence, and any BIOS version requirements before ordering. Registered RDIMMs are mandatory; UDIMM or SODIMM modules will not fit or function. Confirm the system can address the full 288GB across all populated slots.

Lifetime replacement and US-based technical

The kit ships as a matched set of six 48GB modules with no heat spreaders attached. A lifetime replacement warranty covers the memory, and free US-based technical support is available for installation or compatibility questions. No additional software, cables, or mounting hardware are bundled.

I korthet

  • 288 GB total capacity scales memory-heavy workloads with six 48 GB modules
  • DDR5 4800 speed delivers rated bandwidth for the Supermicro H13SVW-NT-OS1 platform
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 10 V operation matches the board's voltage requirement for reliable POST
  • CL40 latency meets the exact timing specification the memory controller expects

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-4828K6
Capacity288GB (6 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content288GB 6X48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

What comes in the 288GB kit and do I need anything else to install it?

The kit contains six 48GB DDR5 4800 CL40 1.1V ECC registered RDIMM modules, part number MR38400-4828K6. No additional parts are required for installation in a compatible Supermicro H13SVW-NT-OS1 motherboard.

Should I choose this 288GB 6×48GB kit or a different capacity for my H13SVW-NT-OS1?

Select this 288GB kit when your workload needs the maximum supported capacity across all six slots with 2Rx8 registered ECC modules at DDR5 4800. Choose a smaller kit only if your memory population plan or budget calls for fewer DIMMs.

What does the DDR5 4800 CL40 rating mean once the modules are running in the server?

The memory will operate at 4800 MT/s with a CAS latency of 40 cycles at 1.1V, delivering PC5-38400 bandwidth per module while the registered buffer and ECC maintain stability across all six populated slots.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.