Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Four green DDR5 RDIMM modules in a kit

NEMIX RAM

NEMIX RAM DDR5 4800 256GB 4X64GB CL40 1.1V ECC RDIMM memory upgrade for Supermicro H13SST-G

SKU CH-JTSX-M62DS

A 256 GB DDR5 ECC registered RDIMM kit of four 64 GB modules running at 4800 MT/s with CL40 latency and 1.1 V for the Supermicro H13SST-G motherboard

  • Capacity256GB (4 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 256GB 4X64GB

Visa 24 fler konfigurationer
  • 256 GB total capacity from four 64 GB modules for dense server workloads
  • DDR5 4800 speed with CL40 latency delivers rated bandwidth for the platform
  • 1 V registered ECC RDIMM architecture reduces controller load and corrects single-bit errors
  • 2Rx4 288-pin form factor matches Supermicro H13SST-G population rules exactly
  • Lifetime replacement warranty with US-based technical support included

Capacity and configuration

This 256GB kit contains four 64GB DDR5 RDIMMs rated at 4800MHz with CL40 timings and 1.1V operation. It is built for the Supermicro H13SST-G motherboard and uses registered ECC modules with a 2Rx4 organisation.

Upgrade path and fit

The kit replaces smaller or slower DDR5 RDIMM sets when the board requires fully populated slots at registered speeds. The jump is worth it when your workload needs the full 256GB capacity and the memory controller demands exact rank, voltage and timing alignment.

Workload headroom

Registered ECC architecture keeps every slot stable at full population while correcting single-bit errors before they affect production. Capacity runs out when the application footprint exceeds 256GB or when the platform requires a higher data rate than 4800MHz.

I korthet

  • 256 GB total capacity from four 64 GB modules for dense server workloads
  • DDR5 4800 speed with CL40 latency delivers rated bandwidth for the platform
  • 1 V registered ECC RDIMM architecture reduces controller load and corrects single-bit errors
  • 2Rx4 288-pin form factor matches Supermicro H13SST-G population rules exactly
  • Lifetime replacement warranty with US-based technical support included

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K4
Capacity256GB (4 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 4X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Will these 288-pin RDIMMs fit the Supermicro H13SST-G memory slots?

Yes, the 288-pin DDR5 RDIMM form factor matches the slots on the H13SST-G motherboard.

What is the correct population order for the four 64 GB modules on this board?

Consult the Supermicro H13SST-G manual for the approved DIMM population sequence; the kit must be installed in the exact order the board specifies.

Do these modules have a heat spreader that could need cleaning or replacement later?

No, the modules are supplied without a heat spreader, so there is no spreader to maintain or replace.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.