NEMIX RAM
NEMIX RAM DDR5 5600 192GB 2x96GB ECC RDIMM Supermicro H13DSG-O-CPU memory upgrade
A 192 GB DDR5 5600 ECC RDIMM kit (2×96 GB, CL46, 1.1 V) verified for the Supermicro H13DSG-O-CPU motherboard
- Capacity192GB (2 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 192 GB total capacity from two 96 GB modules for maximum server density
- DDR5 5600 speed with CL46 latency delivers rated throughput on this platform
- Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
- 1 V operation matches the motherboard's voltage requirement exactly
- 288-pin RDIMM form factor fits the Supermicro H13DSG-O-CPU memory slots
Capacity and Compatibility
This 192GB kit uses two 96GB DDR5 RDIMMs rated at 5600MHz PC5-44800 with CL46 timing and 1.1V operation. The modules are built as 2Rx4 Registered ECC memory specifically validated for the Supermicro H13DSG-O-CPU motherboard. System administrators upgrading that platform receive the exact rank, voltage and timing the memory controller expects for full-capacity recognition at rated speed.
Build Integration
The 288-pin Registered form factor matches the slots on the target motherboard and is not interchangeable with UDIMM or SODIMM alternatives. Registered architecture buffers the command and address signals so the memory controller can drive a fully populated configuration without signal degradation. ECC functionality detects and corrects single-bit errors in flight, preventing silent data corruption and unplanned reboots in production workloads. Consult the system manual for approved DIMM population order before installation.
Warranty and Support
The kit ships as a matched pair of 96GB modules with no heat spreader included. NEMIX RAM backs the memory with a lifetime replacement warranty and provides US-based technical support at no extra charge. Major OEM DRAM from Samsung, Micron or Hynix underpins the modules, but the critical value is the verified fitment for the named Supermicro platform rather than the specific chip supplier.
I korthet
- 192 GB total capacity from two 96 GB modules for maximum server density
- DDR5 5600 speed with CL46 latency delivers rated throughput on this platform
- Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
- 1 V operation matches the motherboard's voltage requirement exactly
- 288-pin RDIMM form factor fits the Supermicro H13DSG-O-CPU memory slots
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-9624K2 |
| Capacity | 192GB (2 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 192GB 2X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Frågor om den här produkten
Will the 5600 MT/s speed hold steady under continuous server workloads?
The kit runs at DDR5 5600 with CL46 timings at 1.10 V, so the rated frequency is maintained as long as the platform keeps the modules within spec.
How much heat and power should I expect from the 2Rx4 RDIMMs in a fully populated chassis?
Registered DDR5 RDIMMs at 1.10 V draw modest power and have no heat spreader; airflow across the 288-pin modules keeps temperatures in normal server range.
Does the Supermicro H13DSG-O-CPU require any specific BIOS setting or population order for these 96 GB modules?
The motherboard manual defines the approved DIMM population sequence and maximum capacity per channel; follow that guide before installing the 2 x 96 GB kit.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.



