Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green rectangular DDR5 RDIMM module with black chips on both sides and gold edge connectors, no heat spreader

NEMIX RAM

NEMIX RAM DDR5 6400 128GB 4Rx4 CL52 1.1V ECC RDIMM memory upgrade

SKU CH-183P-817TC

128GB DDR5-6400 registered ECC RDIMM, CL52 at 1.1V, 4Rx4, validated for Supermicro X14SDW-64C-SP9F

  • Capacity128GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 128GB

Visa 4 fler konfigurationer
  • 128 GB capacity scales memory-heavy workloads
  • DDR5 6400 speed delivers rated bandwidth
  • CL52 latency matches controller timing
  • 10 V operation reduces power draw
  • 4Rx4 registered ECC corrects single-bit errors

Exact-match 128 GB DDR5-6400 server module

This NEMIX RAM RDIMM delivers 128 GB of DDR5-6400 (PC5-51200) capacity in a single 288-pin registered DIMM. It is built for the Supermicro X14SDW-64C-SP9F motherboard and matches the exact rank, voltage and timing the platform expects.

Registered ECC design with 4Rx4 organisation

The module uses a registered (buffered) architecture that offloads the memory controller, allowing every slot to run fully populated at rated speed. ECC corrects single-bit errors on the fly, while the 4Rx4 layout and 1.10 V operation meet the board's population rules without a heat spreader.

DDR5-6400 interface limits

The DDR5-6400 standard sets the maximum data rate at 6400 MT/s and the CAS latency at CL52 for this module. Registered ECC RDIMMs cannot be mixed with unbuffered UDIMMs or SODIMMs, and the motherboard manual must be consulted for supported capacities and approved DIMM population order before installation.

I korthet

  • 128 GB capacity scales memory-heavy workloads
  • DDR5 6400 speed delivers rated bandwidth
  • CL52 latency matches controller timing
  • 10 V operation reduces power draw
  • 4Rx4 registered ECC corrects single-bit errors

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-744K1
Capacity128GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Does the DDR5 6400 interface cap at PC5-51200 bandwidth for this module?

Yes, the module runs at DDR5 6400 (PC5-51200) with CL52 latency and 1.10 V, matching the Supermicro X14SDW-64C-SP9F memory controller specification.

What physical slot and form factor does this 288-pin RDIMM require?

It fits a standard 288-pin DDR5 RDIMM socket; the registered design and 4Rx4 organisation mean the motherboard must support registered ECC DIMMs, not UDIMM or SODIMM.

What population order does the Supermicro X14SDW-64C-SP9F manual specify for a 128 GB 4Rx4 kit?

Install the DIMM in the slot sequence listed in the board manual for single-DIMM-per-channel population; the common mistake is skipping the prescribed slot and leaving the primary channel empty.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.