BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00276429BTC
I lager
NEMIX RAM
NEMIX RAM DDR5 6400 192GB 12x16GB CL52 1.1V ECC RDIMM Supermicro H14DST-F memory upgrade
A 192 GB DDR5-6400 ECC RDIMM kit of twelve 16 GB modules at 1.1 V CL52, validated for the Supermicro H14DST-F motherboard
- Capacity192GB (12 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- Exact 192 GB DDR5-6400 kit for Supermicro H14DST-F
- Registered ECC RDIMM prevents silent data corruption
- 1 V CL52 1Rx8 modules run at rated speed fully populated
- 12 x 16 GB 288-pin DIMMs match board population rules
- Lifetime replacement warranty with US-based technical support
192GB DDR5 ECC RDIMM Kit for Supermicro H14DST-F
This 192GB kit contains twelve 16GB DDR5 6400 RDIMM modules built to the exact specifications required by the Supermicro H14DST-F motherboard. Registered ECC architecture with CL52 latency and 1.1V operation ensures full-capacity recognition and stable performance in enterprise server environments. It targets administrators upgrading memory capacity on this specific platform.
Upgrade from partial population
Replacing empty slots or smaller modules with this 12 x 16GB configuration maximises the board's supported capacity while maintaining the registered signal integrity needed for full population. The jump is worth it when workloads demand the full 192GB at the native DDR5 6400 data rate without downclocking. Buyers needing a different total capacity or a UDIMM form factor should look elsewhere.
Tool-free installation
Modules seat into the 288-pin DDR5 slots without tools, but the motherboard manual dictates the exact population sequence for twelve DIMMs. Ignoring that order is the most common cause of POST failures or reduced memory speed. Verify the approved slot layout before starting, and handle modules by the edges to protect the gold contacts.
I korthet
- Exact 192 GB DDR5-6400 kit for Supermicro H14DST-F
- Registered ECC RDIMM prevents silent data corruption
- 1 V CL52 1Rx8 modules run at rated speed fully populated
- 12 x 16 GB 288-pin DIMMs match board population rules
- Lifetime replacement warranty with US-based technical support
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K12 |
| Capacity | 192GB (12 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 192GB 12X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Frågor om den här produkten
Does the 288-pin RDIMM form factor match the Supermicro H14DST-F memory slots?
Yes, the kit uses the 288-pin Registered RDIMM form factor that the Supermicro H14DST-F motherboard requires; it is not a UDIMM or SODIMM.
What is the correct population order when filling all 12 slots with these 1Rx8 modules?
Follow the Supermicro H14DST-F manual for approved DIMM population order; the board’s memory-controller rules dictate which slots must be filled first for full 192 GB recognition.
How do I know when a module needs replacement if ECC starts logging corrected errors?
Monitor the system’s ECC corrected-error counters; a rising trend on a specific DIMM indicates that module should be swapped before uncorrectable errors appear.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
