BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00278214BTC
I lager
NEMIX RAM
NEMIX RAM DDR5 6400 288GB (6x48GB) ECC RDIMM CL52 1.1V Supermicro H13SVW-N memory upgrade
288 GB DDR5 6400 ECC RDIMM kit of six 48 GB modules at 1.1 V CL52, validated for Supermicro H13SVW-N motherboards
- Capacity288GB (6 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 288 GB total capacity from six 48 GB modules for large memory workloads
- DDR5-6400 speed with CL52 latency delivers rated bandwidth to the Supermicro H13SVW-N
- Registered ECC architecture corrects single-bit errors and supports full population stability
- 1 V operation matches the motherboard's memory controller specification exactly
- 288-pin RDIMM form factor fits the Supermicro H13SVW-N motherboard slots
288GB DDR5-6400 ECC RDIMM kit
This NEMIX RAM kit delivers 288GB across six 48GB DDR5-6400 registered ECC modules. It targets administrators upgrading a Supermicro H13SVW-N motherboard that requires 288-pin RDIMMs with 2Rx8 organisation. The exact-match specifications ensure the memory controller recognises full capacity at rated speed without manual tuning.
Sustained-load behaviour
Registered architecture buffers address and command signals, letting all six slots stay populated at DDR5-6400 without signal degradation. ECC detects and corrects single-bit errors on the fly, preventing silent data corruption during long compute runs. The 1.1V operating voltage keeps power draw predictable under continuous server workloads.
Upgrade context
This kit replaces smaller-capacity DDR5 RDIMMs or incomplete populations that leave memory channels unbalanced. The jump is worth it when your workload needs the full 288GB at native DDR5-6400 throughput and your board’s population rules support six 2Rx8 modules. It does not suit systems limited to UDIMMs, SODIMMs, or lower maximum capacities per slot.
I korthet
- 288 GB total capacity from six 48 GB modules for large memory workloads
- DDR5-6400 speed with CL52 latency delivers rated bandwidth to the Supermicro H13SVW-N
- Registered ECC architecture corrects single-bit errors and supports full population stability
- 1 V operation matches the motherboard's memory controller specification exactly
- 288-pin RDIMM form factor fits the Supermicro H13SVW-N motherboard slots
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-4828K6 |
| Capacity | 288GB (6 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 288GB 6X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Frågor om den här produkten
How much power does each 48 GB 1.1 V DDR5-6400 RDIMM draw when the server runs continuously?
Each module operates at 1.1 V, the standard DDR5-6400 voltage, so power draw per DIMM is determined by that voltage and the 2Rx8 density rather than by any higher-voltage profile.
What must the motherboard provide for this 6-module 288 GB kit to be recognised at its rated 6400 MT/s speed?
The board needs 288-pin DDR5 RDIMM slots that support 2Rx8 registered ECC DIMMs at 1.1 V with CL52 timing, plus a memory controller able to address the full 288 GB across six populated slots.
Will these 2Rx8 CL52 registered ECC modules run at full speed alongside any older DDR5 DIMMs I might keep installed?
Mixing ranks, voltages or timings can force the controller to down-clock all slots; for guaranteed DDR5-6400 operation the board should be populated only with matching 2Rx8 1.1 V CL52 RDIMMs.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
