BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00277887BTC
I lager
NEMIX RAM
NEMIX RAM DDR5 6400 96GB (6x16GB) CL52 1.1V ECC RDIMM Supermicro H14DSG-OM memory upgrade
96 GB DDR5 ECC registered server memory kit with six 16 GB modules at 6400 MHz, CL52, 1.1 V, validated for Supermicro H14DSG-OM motherboards
- Capacity96GB (6 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 96 GB capacity across six 16 GB modules maximises server density
- DDR5 6400 speed with CL52 latency delivers rated throughput for Supermicro H14DSG-OM
- Registered ECC architecture offloads the controller and corrects single-bit errors
- 1 V operation meets the board's exact voltage requirement for stable population
- 288-pin RDIMM form factor matches the motherboard's required slot type exactly
96GB DDR5-6400 ECC RDIMM kit
This 96GB kit contains six 16GB DDR5 registered DIMMs rated at 6400 MT/s with CL52 latency and 1.1V operation. It is built for the Supermicro H14DSG-OM motherboard and uses the 288-pin RDIMM form factor that board requires.
Suited for Supermicro H14DSG-OM servers
The modules match the board's registered ECC specification and 1Rx8 rank structure so the memory controller recognises full capacity at rated speed. Builders using consumer UDIMMs, SODIMMs or non-ECC memory should look elsewhere because those types will not function in this platform.
Check motherboard manual before ordering
Verify the approved DIMM population order and maximum supported capacity per channel for your specific BIOS revision. Ensure all six slots can be populated with registered ECC RDIMMs at 6400 MT/s and confirm the system accepts 1.1V operation.
I korthet
- 96 GB capacity across six 16 GB modules maximises server density
- DDR5 6400 speed with CL52 latency delivers rated throughput for Supermicro H14DSG-OM
- Registered ECC architecture offloads the controller and corrects single-bit errors
- 1 V operation meets the board's exact voltage requirement for stable population
- 288-pin RDIMM form factor matches the motherboard's required slot type exactly
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K6 |
| Capacity | 96GB (6 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 96GB 6X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Frågor om den här produkten
Does my Supermicro H14DSG-OM motherboard need all six DDR5 RDIMM slots free to install this 96GB kit?
The kit provides six 16GB modules, so every DDR5 RDIMM slot you intend to populate must be free. Check the board manual for the exact population order before installation.
Will these 1Rx8 registered ECC DDR5 modules run at 6400MHz CL52 alongside older DDR5 RDIMMs I keep in the system?
Mixing ranks, latencies or voltages can force the memory controller to downclock all modules. For stable operation at the rated 6400MHz CL52 1.1V, populate all channels with identical 1Rx8 registered ECC modules.
How can I confirm the kit is running at DDR5-6400 CL52 1.1V after installation?
Enter the BIOS or use a hardware-information utility to verify the memory speed shows 6400MT/s, CAS latency 52 and voltage 1.1V with ECC active on all six modules.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
