BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00277188BTC
I lager
NEMIX RAM
NEMIX RAM DDR5 64GB 4x16GB ECC RDIMM 6400 CL52 1.1V 288-pin Supermicro H13SST-GC memory upgrade
64 GB (4 × 16 GB) DDR5-6400 ECC Registered RDIMM kit at 1.1 V, CL52, validated for Supermicro H13SST-GC motherboards
- Capacity64GB (4 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 64 GB capacity from four 16 GB modules for full server population
- DDR5 6400 speed with CL52 latency runs at rated frequency
- Registered ECC design corrects single-bit errors and buffers the controller
- 1 V operation matches the motherboard's memory-controller specification
- Validated fitment for Supermicro H13SST-GC motherboard with 288-pin RDIMM slots
Exact-match DDR5-6400 upgrade for Supermicro
This 64 GB kit contains four 16 GB DDR5-6400 registered ECC RDIMMs built to the precise 1Rx8 rank, 1.10 V voltage and CL52 timing the motherboard expects. The modules are recognised at full capacity and run at their rated 6400 MT/s speed without manual tuning. Designed for administrators who need guaranteed compatibility on this specific platform.
Registered ECC architecture with lifetime support
Registered buffering offloads the memory controller so all four slots operate stably at full population, while on-die ECC corrects single-bit errors before they reach applications. The kit ships as a matched set with a lifetime replacement warranty and US-based technical support, removing the risk of mixed-rank instability.
64 GB headroom for virtualisation and databases
Four populated slots deliver 64 GB of addressable memory, sufficient for moderate virtual-machine densities, in-memory databases and container workloads. Workloads that require more than 64 GB or higher memory bandwidth will exceed this kit's capacity and need a platform with additional DIMM slots or faster memory speeds.
I korthet
- 64 GB capacity from four 16 GB modules for full server population
- DDR5 6400 speed with CL52 latency runs at rated frequency
- Registered ECC design corrects single-bit errors and buffers the controller
- 1 V operation matches the motherboard's memory-controller specification
- Validated fitment for Supermicro H13SST-GC motherboard with 288-pin RDIMM slots
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 64GB 4X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Frågor om den här produkten
Will the 288-pin RDIMM modules need any periodic replacement or firmware updates?
The modules are solid-state with no moving parts and require no scheduled replacement or firmware updates under normal server operation.
What limit appears first when the kit runs at 6400 MT/s continuously in a fully populated Supermicro H13SST-GC?
The memory controller's maximum supported speed and the board's population rules set the practical ceiling; the kit is specified at CL52 and 1.10 V for that platform.
How much heat and power does the 64 GB kit draw during all-day operation?
Each 16 GB RDIMM operates at 1.10 V without a heat spreader, so total power draw and thermal output stay within standard DDR5 registered DIMM limits for the platform.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
