Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green rectangular DDR5 RDIMM module with black chips and gold contacts, no heat spreader

NEMIX RAM

NEMIX RAM DDR5 ECC RDIMM 16GB 5600 CL46 1.1V 1Rx8 Supermicro H14SST-G memory upgrade

SKU CH-MK1S-Y1Y0K

16 GB DDR5-5600 ECC registered RDIMM validated for Supermicro H14SST-G motherboards

  • Capacity16GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • Exact-match 16 GB DDR5-5600 module runs at rated speed
  • Registered ECC design prevents silent data corruption
  • 1 V operation cuts power draw per stick
  • 288-pin RDIMM form factor fits Supermicro H14SST-G
  • 1Rx8 rank layout matches controller expectations

Exact DDR5 ECC RDIMM for Supermicro H14SST-G

This 16GB NEMIX RAM module runs at DDR5 5600 (PC5-44800) with CL46 latency at 1.10V. It is a 288-pin Registered DIMM built with a 1Rx8 organisation and on-board ECC for single-bit error correction.

Suited for single-slot expansion on the named

Administrators populating empty slots on a Supermicro H14SST-G will get immediate recognition at the rated 5600 speed. Builders who need unbuffered UDIMMs, SODIMM form factors, non-ECC memory, or capacities beyond the board's validated population list should choose a different module.

Registered architecture offloads the memory

The RDIMM buffer lets every populated slot operate at full capacity and rated timing without overloading the CPU's integrated memory controller. ECC protection runs transparently, correcting single-bit errors before they reach the OS. Verify the motherboard manual for approved slot order and maximum supported capacity before installation.

I korthet

  • Exact-match 16 GB DDR5-5600 module runs at rated speed
  • Registered ECC design prevents silent data corruption
  • 1 V operation cuts power draw per stick
  • 288-pin RDIMM form factor fits Supermicro H14SST-G
  • 1Rx8 rank layout matches controller expectations

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K1
Capacity16GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Frågor om den här produkten

Does the Supermicro H14SST-G motherboard require registered ECC DDR5 RDIMMs for this 16 GB module to function?

Yes. The board only accepts 288-pin registered ECC DDR5 RDIMMs; unbuffered UDIMMs or SODIMMs will not be recognised or fit the slots.

Can I mix this 1Rx8 CL46 5600 MT/s kit with existing 4800 MT/s DDR5 RDIMMs in the same server?

The system will down-clock all modules to the slowest installed speed, so the 5600 MT/s kit will run at 4800 MT/s while keeping ECC and registered operation intact.

How do I confirm the module is running at 5600 MT/s with CL46 timings after installation?

Check the BIOS memory information screen or run a tool such as dmidecode; it should report 5600 MT/s, PC5-44800, CAS latency 46, 1.10 V and 1Rx8 organisation.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.