Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Sixteen green DDR5 RDIMM modules in a row, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 ECC RDIMM 256GB (16x16GB) 6400 CL52 1.1V 1Rx8 Supermicro H13DSH

SKU CH-DPEF-HS9J9

A 256GB (16×16GB) DDR5-6400 ECC Registered RDIMM kit at 1.1V CL52, validated for Supermicro H13DSH servers

  • Capacity256GB (16 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 256GB kit fills every slot on the Supermicro H13DSH
  • DDR5-6400 CL52 at 1.1V matches the board's rated speed
  • Registered ECC design keeps all 16 modules stable at full capacity
  • 1Rx8 rank layout meets the motherboard's exact population rules
  • Major OEM Samsung, Micron or Hynix chips deliver enterprise-grade reliability

Server memory kit for Supermicro H13DSH

This 256GB kit contains sixteen 16GB DDR5 Registered ECC RDIMMs built for the Supermicro H13DSH motherboard. Each module runs at 6400MHz with CL52 latency at 1.1V in a 1Rx8 layout. The registered design lets the memory controller drive all sixteen slots at full capacity.

Suited for administrators populating every slot

Buyers who need a smaller capacity or a different form factor such as UDIMM or SODIMM should look elsewhere. Systems that cannot accept registered ECC DDR5 RDIMMs will not work with this kit.

288-pin DDR5 RDIMM form factor

The modules use the 288-pin registered DDR5 layout required by the H13DSH. A motherboard that does not support this exact pinout and registered signalling will not recognise the memory.

I korthet

  • 256GB kit fills every slot on the Supermicro H13DSH
  • DDR5-6400 CL52 at 1.1V matches the board's rated speed
  • Registered ECC design keeps all 16 modules stable at full capacity
  • 1Rx8 rank layout meets the motherboard's exact population rules
  • Major OEM Samsung, Micron or Hynix chips deliver enterprise-grade reliability

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-618K16
Capacity256GB (16 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 16X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Frågor om den här produkten

Will the 6400 MT/s speed actually run at 6400 MT/s on a Supermicro H13DSH?

The kit is spec-matched to the H13DSH so the memory controller recognises the 1Rx8 rank, 1.10 V voltage and CL52 timing, allowing all 16 modules to operate at the rated DDR5-6400 data rate.

What does the PC5-51200 label cap in real use?

PC5-51200 denotes the peak transfer bandwidth of the DDR5-6400 modules; actual throughput is limited by the H13DSH memory controller and the number of populated channels.

Do these 288-pin RDIMMs fit the H13DSH DIMM slots without adapters?

Yes, the 288-pin registered RDIMM form factor is exactly what the H13DSH requires; no UDIMM or SODIMM adapters are needed.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.