Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in

Noctua

Noctua NF-A6x25 FLX 60mm 25mm 3-pin case fan

SKU CH-CQFN-K9F17 MPN NF-A6x25 FLX

A 60×25 mm case fan with SSO2 bearings offering 29.2 m³/h airflow at 19.3 dB(A), plus two adaptors for 1600–3000 RPM operation

  • Fan Counts1 Fan
  • Fan ControllerNo Controller
  • TypeCase Fan
  • Fan Size60mm
  • Fan Thickness25mm
  • Bearing TypeSSO2

LED Non-LED

  • Non-LED
  • No

Model FLX

  • PWM
  • FLX
  • 5V PWM
  • 5V

Genomstrukna varianter finns, men är inte i lager här.

  • Near-silent operation at 8.2 dB(A) with Ultra-Low-Noise Adapter
  • 2 m³/h maximum airflow for effective 60 mm cooling
  • Three selectable speeds via included Low-Noise and Ultra-Low-Noise Adapters
  • SSO2 bearing and Smooth Commutation Drive 2 for long-term stability
  • Anti-vibration pads and compensators reduce case resonance

Targeted compact cooling

The NF-A6x25 FLX is a 60mm square, 25mm thick case fan designed for tight spaces such as NAS units, DVRs, network gear and 3D printers. Its 3-pin connector and included 3:4-pin adaptor let it draw power from a motherboard header or directly from a PSU. The brown, non-LED frame fits unobtrusively into professional or industrial enclosures.

Three-speed airflow headroom

At full speed the fan moves 29.2 m³/h at 3000 RPM; the supplied Low-Noise Adaptor drops this to 23.5 m³/h at 2400 RPM, and the Ultra-Low-Noise Adaptor further reduces output to 16.7 m³/h at 1600 RPM. Builders can select the adaptor that matches the thermal load, but the 60mm form factor limits absolute airflow compared with larger fans.

Quiet operation and low power

Acoustic output measures 19.3 dB(A) at full speed, 14.5 dB(A) with the L.N.A. and 8.2 dB(A) with the U.L.N.A. The SSO2 bearing and Smooth Commutation Drive 2 keep running noise smooth across all three settings. Rated MTTF exceeds 150000 hours, indicating minimal power draw and long service life in continuous use.

I korthet

  • Near-silent operation at 8.2 dB(A) with Ultra-Low-Noise Adapter
  • 2 m³/h maximum airflow for effective 60 mm cooling
  • Three selectable speeds via included Low-Noise and Ultra-Low-Noise Adapters
  • SSO2 bearing and Smooth Commutation Drive 2 for long-term stability
  • Anti-vibration pads and compensators reduce case resonance

Specifikationer

BrandNoctua
SeriesA-Series
ModelNF-A6x25 FLX
Fan Counts1 Fan
Fan ControllerNo Controller
TypeCase Fan
Fan Size60mm
Fan Thickness25mm
Bearing TypeSSO2
RPMRotational Speed (+/- 10%): 3000 RPM
Rotational Speed with L.N.A. (+/- 10%): 2400 RPM
Rotational Speed with U.L.N.A. (+/- 10%): 1600 RPM
Air FlowAirflow: 29.2 m3/h
Airflow with L.N.A.: 23.5 m3/h
Airflow with U.L.N.A.: 16.7 m3/h
Noise LevelAcoustical Noise: 19.3 dB(A)
Acoustical Noise with L.N.A.: 14.5 dB(A)
Acoustical Noise with U.L.N.A.: 8.2 dB(A)
Power Connector3 Pin
ColorBrown
LEDNon-LED
FeaturesFlow Acceleration Channels
Reduced Motor Hub Size
AAO Frame
Stepped Inlet Design
Inner Surface Microstructures
Integrated Anti-Vibration Pads
Smooth Commutation Drive 2
3 speed settings for full flexibility
Dimensions60 x 60 x 25mm
Package ContentsLow-Noise Adapter (L.N.A.)
Ultra-Low-Noise Adapter (U.L.N.A.)
3:4-Pin Adaptor
30cm Extension Cable
4 Vibration-Compensators
4 Fan Screws
Fraktvikt0.20 kg
Paketstorlek178 × 152 × 38 mm

Andra versioner av den här modellen

1 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Will this 60mm 3-pin fan fit the same mounting holes as my old 60mm fan?

Yes, the 60 x 60 x 25mm frame matches standard 60mm mounting, and the box includes four fan screws plus four vibration-compensators for a direct swap.

How do I confirm the fan is running at the chosen speed after installing the Low-Noise or Ultra-Low-Noise Adapter?

With the L.N.A. fitted the fan spins at 2400 RPM and 23.5 m3/h at 14.5 dB(A); with the U.L.N.A. it runs at 1600 RPM, 16.7 m3/h and 8.2 dB(A).

Does the package include everything needed to power the fan from a 4-pin Molex connector on my PSU?

The box contains a 3:4-pin adaptor, a 30cm extension cable, the L.N.A. and U.L.N.A. adapters, four vibration-compensators and four fan screws.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.