Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Small black square 50mm fan with three-pin connector

OEM Industries

OEM Industries BS501012H 50mm 12V 0.16A 3 Pin Fan

SKU CH-ZDPQ-BT984

50mm 12V ball-bearing fan with 3-pin connector for case or CPU cooling

  • ColorBlack
  • TypeFan only
  • Fan Size50mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • 50 mm square footprint fits tight chassis spaces
  • 12 V 0.16 A draw keeps power use low
  • Ball bearing design extends operational life
  • Three-pin connector enables speed monitoring
  • No LED lighting suits stealth builds

Compact 50 mm case fan

The OEM Industries BS501012H is a 50 mm square fan designed for tight spaces inside a PC chassis. It runs on 12 V and draws 0.16 A through a standard three-pin power connector. The ball bearing and black frame suit general case airflow or small CPU cooler replacements.

Replaces noisy or failed 50 mm fans

Swap this unit in when an existing 5010-size fan becomes loud, develops bearing rattle or stops spinning. The 12 V 0.16 A rating matches the original spec, so the jump is worth it when the old fan no longer moves enough air through a compact heatsink or chassis vent.

Simple three-pin installation

The three-wire connector plugs directly onto a motherboard or fan-controller header keyed for 501012 pinout. Alignment is the only common issue — forcing the plug offset by one pin bends the header and leaves the fan unpowered.

I korthet

  • 50 mm square footprint fits tight chassis spaces
  • 12 V 0.16 A draw keeps power use low
  • Ball bearing design extends operational life
  • Three-pin connector enables speed monitoring
  • No LED lighting suits stealth builds

Specifikationer

ModelBS501012H
ColorBlack
TypeFan only
Fan Size50mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Frågor om den här produkten

Will the 50mm square frame with 10mm thickness fit my case fan slot?

The fan measures 50mm by 50mm and is 10mm thick, so it fits any standard 50mm mounting hole pattern.

How do I connect the 3‑pin connector so the motherboard reads speed correctly?

Align the three pins with the motherboard header — ground, 12V, and tach — and press straight in; forcing it sideways bends pins and loses RPM reporting.

When should I replace the ball‑bearing fan?

Replace it once the bearing noise becomes audible or the rotor stops spinning at 12V 0.16A, as ball bearings cannot be relubricated.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.