Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Black 80mm square fan with 3-pin connector

OEM Industries

OEM Industries MGT8012HR-A25 80mm 12V 0.24A 3-pin CPU cooler

SKU CH-F2QA-YM5BV

An 80 mm case fan with 12 V, 0.24 A power draw and a 3-pin connector for server CPU cooling

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Power Connector3 Pin
  • LEDNo
  • 80 mm frame fits tight server chassis
  • 12 V, 0.24 A draw keeps power load low
  • 3-pin connector plugs straight into standard headers
  • 25 mm slim profile clears low-profile heatsinks
  • Black fan-only design suits clean builds

OEM Industries 80mm 3-pin CPU Cooler

The OEM Industries MGT8012HR-A25 is an 80mm fan-only cooler designed for 12V systems drawing 0.24A. It uses a standard three-pin power connector and fits server or compact chassis where an 80 by 25mm footprint is required.

Suitable for tight server builds.

This cooler suits administrators maintaining 1U or blade servers that specify an 80mm mounting pattern and three-pin control. Builders needing to dissipate heavy desktop thermal loads or wanting PWM speed regulation should look at larger heatsink assemblies with four-pin headers.

Simple three-pin installation.

Mounting uses the standard 80mm screw pattern so installation is straightforward in compatible chassis. The most common issue is discovering the three-pin header lacks PWM control, leaving the fan at constant speed, or finding the 25mm thickness blocks adjacent components in dense layouts.

I korthet

  • 80 mm frame fits tight server chassis
  • 12 V, 0.24 A draw keeps power load low
  • 3-pin connector plugs straight into standard headers
  • 25 mm slim profile clears low-profile heatsinks
  • Black fan-only design suits clean builds

Specifikationer

ModelMGT8012HR-A25
ColorBlack
TypeFan only
Fan Size80mm
Power Connector3 Pin
LEDNo

Frågor om den här produkten

What 3-pin header on the motherboard must be free to connect the MGT8012HR-A25?

The cooler uses a standard 3-pin power connector, so any 3-pin fan header labelled CPU_FAN or SYS_FAN will supply the 12V 0.24A it needs.

Will the 80mm frame fit in the same mounting holes as my current 80mm case fan?

Yes, the 80mm square frame with 25mm thickness matches the common 80mm mounting pattern used on many chassis and server brackets.

How can I confirm the fan is spinning at the expected speed after installation?

Enter the BIOS or use a hardware monitoring utility to check the RPM reading on the header where the 3-pin connector is attached.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.