Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green bare circuit board DDR5 ECC registered RDIMM 288-pin 128GB module

OWC

OWC 128GB DDR5 5600 PC5-44800 CL46 4Rx4 288-pin 1.1V ECC Registered RDIMM

SKU CH-SB3B-JVT89

Single 128 GB DDR5 ECC registered DIMM at 5600 MT/s CL46 1.1 V for Supermicro SuperServer 211 series

  • Capacity128GB
  • Type288-Pin DDR5 ECC RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS Latency46
  • Voltage1.1V
  • ECCYes

Capacity 128GB

  • ECC registered design protects data integrity in servers
  • 128 GB capacity fits in one 288-pin DDR5 slot
  • DDR5 5600 speed with CL46 latency at 1.1 V
  • Validated for Supermicro SuperServer SYS-211E-FRN2T and related models
  • JEDEC and RoHS compliant for warranty-safe upgrades

Server Memory Upgrade

This 128GB DDR5 5600 registered ECC module is built for the listed Supermicro SuperServer platforms. It targets administrators who need a single high-capacity DIMM to expand memory in compatible workstation or server chassis. The 4Rx4 organisation and 1.1V operation match the OEM specification for these systems.

Registered ECC Constraints

The module uses registered ECC DDR5 technology at PC5-44800 with CL46 latency. It will not function in standard desktop boards or in systems that require unbuffered or load-reduced DIMMs. Mixing this stick with non-registered memory is not supported and will prevent boot on the validated platforms.

Build and Installation

The bare 288-pin PCB has no heat spreader, relying on chassis airflow for thermal management. A single DIMM occupies one slot, leaving remaining channels available for identical modules to maintain matched ranks. JEDEC and ROHS compliance ensures the upgrade meets the original manufacturer specifications for the supported SuperServer models.

I korthet

  • ECC registered design protects data integrity in servers
  • 128 GB capacity fits in one 288-pin DDR5 slot
  • DDR5 5600 speed with CL46 latency at 1.1 V
  • Validated for Supermicro SuperServer SYS-211E-FRN2T and related models
  • JEDEC and RoHS compliant for warranty-safe upgrades

Specifikationer

BrandOWC
Part Number5R6D54R4128G
Capacity128GB
Type288-Pin DDR5 ECC RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS Latency46
Voltage1.1V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperServer SYS-211E-FRN2T
Supermicro SuperServer SYS-211GT-HNC8F
Supermicro SuperServer SYS-211GT-HNC8R
Supermicro SuperServer SYS-211GT-HNTF
Supermicro SuperServer SYS-211GT-HNTR

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Should I pick the 128GB DDR5 5600 CL46 4Rx4 RDIMM or a smaller capacity for my SuperServer?

The 128GB module fills one 288-pin slot with 4Rx4 organisation, giving maximum density per channel for the listed SuperServer models.

What does the 5600 MT/s rating deliver inside a Supermicro SYS-211E-FRN2T?

The module runs at the JEDEC DDR5 5600 standard with CL46 latency at 1.1V, providing the peak bandwidth the platform’s memory controller supports.

How does the DDR5 288-pin ECC Registered interface limit performance in practice?

The registered buffer adds one cycle of command latency, capping maximum frequency to the 5600 MT/s JEDEC spec while ensuring signal integrity across full server memory populations.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.