Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Two black DDR3 UDIMM sticks without heat spreaders

OWC

OWC 16GB (2x8GB) DDR3 1600 CL11 ECC Unbuffered UDIMM Kit

SKU CH-TM4W-VPV0S

A 16 GB dual-channel DDR3 1600 kit with ECC error correction for workstations and servers

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 16GB (2 x 8GB)

  • 16 GB dual-channel kit expands multitasking headroom
  • DDR3 1600 CL11 timing keeps latency low
  • ECC unbuffered design protects data integrity in workstations
  • 5 V JEDEC-standard voltage ensures broad compatibility
  • 240-pin UDIMM form factor fits standard desktop slots

Kit composition and purpose

This OWC kit supplies 16 GB of DDR3 memory in a matched pair of 8 GB modules. It is built for desktop workstations, servers and NAS systems that require ECC protection and run at 1.5 V. The unbuffered design suits standard consumer and entry-level server boards.

Capacity and headroom

Two 8 GB DIMMs give a total of 16 GB running at DDR3 1600 with CL11 timing. This amount handles typical multi-tasking, virtualisation and file-serving workloads. Systems needing more than 16 GB will require additional slots or higher-density modules.

DDR3 interface limits

The modules use the 240-pin DDR3 form factor and operate at the JEDEC-standard PC3-12800 speed grade. Bandwidth and latency are fixed by the DDR3 1600 specification; faster DDR3 speeds or later DDR generations are not supported by this kit.

I korthet

  • 16 GB dual-channel kit expands multitasking headroom
  • DDR3 1600 CL11 timing keeps latency low
  • ECC unbuffered design protects data integrity in workstations
  • 5 V JEDEC-standard voltage ensures broad compatibility
  • 240-pin UDIMM form factor fits standard desktop slots

Specifikationer

BrandOWC
Part Number1E6D32R8016P
Capacity16GB (2 x 8GB)
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCYes
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorBlack
Heat SpreaderNo
Recommend UseWorkstations, Servers, and NAS Systems
LED ColorNone

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Will the 240-pin DDR3 1600 CL11 modules work in my older workstation that only supports unbuffered ECC memory?

Yes, the kit uses 240-pin DDR3 1600 CL11 unbuffered ECC DIMMs at 1.5 V, matching the JEDEC PC3-12800 standard for compatible desktops, workstations and servers.

How can I verify the dual-channel kit is running at the rated 1600 MHz CL11 after installation?

Enter the system BIOS or UEFI and confirm the memory frequency reads 1600 MHz with CAS latency 11; CPU-Z or dmidecode will also show each 8 GB module operating at PC3-12800 1.5 V.

Does the 16 GB kit include only the two 8 GB DIMMs, or are any cables or tools supplied?

The box contains only the two 8 GB DDR3 1600 CL11 ECC unbuffered UDIMMs; no cables, screws or installation tools are included.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.