Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Two black DDR4 UDIMM sticks without heat spreaders, 288 pins each

OWC

OWC 16GB (2x8GB) DDR4 3200MHz CL22 ECC Unbuffered UDIMM 1.2V 288-pin desktop RAM

SKU CH-MYTK-PG087

16 GB dual-channel DDR4-3200 ECC unbuffered UDIMM kit for workstations, servers and NAS at 1.2 V

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.2V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 16GB (2 x 8GB)

  • ECC protection guards data integrity in workstations and servers
  • Dual-channel 16 GB kit boosts multitasking responsiveness
  • 3200 MHz DDR4 speed with CL22 latency
  • 2 V operation reduces power draw and heat
  • Backward compatible with 2133, 2400, 2666 and 2933 MHz systems

16GB DDR4 ECC Kit for Workstations

This dual-channel kit provides 16GB of DDR4 3200MHz memory with CL22 latency and ECC error correction. It is built for desktop PCs, workstations, servers and NAS systems that require data integrity. The modules run at a standard 1.2V JEDEC voltage.

Capacity and Speed Headroom

The 2x8GB configuration delivers 16GB total capacity for multitasking and larger datasets. Rated at 3200MHz PC4-25600, the modules also run at 2933MHz, 2666MHz, 2400MHz and 2133MHz speeds automatically. ECC function adds overhead but protects against single-bit errors in critical workloads.

Unbuffered 288-Pin Design

These unbuffered UDIMMs fit standard 288-pin desktop DIMM slots without registration buffers. The black PCB has no heat spreader, keeping the profile low for tight CPU cooler clearance. Installation is a straightforward DIY upgrade on compatible motherboards supporting ECC unbuffered memory.

I korthet

  • ECC protection guards data integrity in workstations and servers
  • Dual-channel 16 GB kit boosts multitasking responsiveness
  • 3200 MHz DDR4 speed with CL22 latency
  • 2 V operation reduces power draw and heat
  • Backward compatible with 2133, 2400, 2666 and 2933 MHz systems

Specifikationer

BrandOWC
Part Number3E2D41R8016P
Capacity16GB (2 x 8GB)
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.2V
ECCYes
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorBlack
Heat SpreaderNo
Recommend UseWorkstations, Servers, and NAS Systems
LED ColorNone

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Will the 3200MHz CL22 ECC UDIMM run with my existing 2666MHz DDR4 sticks?

The modules are backward compatible with 2133MHz, 2400MHz, 2666MHz and 2933MHz DDR4, so they will operate at the speed of the slowest installed memory.

How can I verify the ECC function is active after installing the 288-pin kit?

Enter the system BIOS or UEFI and confirm that ECC support is enabled; the firmware will typically display the ECC status on the memory information screen.

What comes in the 16GB dual-channel package and do I need a heat spreader?

The box contains two black 8GB 1RX8 DDR4 3200MHz CL22 ECC unbuffered UDIMMs; no heat spreader is included or required for these 1.2V modules.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.