Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Two green DDR5 RDIMM modules with gold contacts and black chips

OWC

OWC 32GB (2x16GB) DDR5 4800 CL40 ECC Registered RDIMM for Dell PowerEdge HS5610 HS5620

SKU CH-6TSV-AQPAM

A 32 GB kit of two 16 GB DDR5 4800 CL40 ECC registered RDIMMs for Dell PowerEdge HS5610 and HS5620 servers

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 ECC RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.1V
  • ECCYes

Capacity 32GB (2 x 16GB)

  • ECC registered design prevents data corruption in Dell PowerEdge HS5610 and HS5620 servers
  • 32GB kit with two 16GB modules expands memory capacity for virtualisation workloads
  • DDR5 4800 CL40 at 1.1V delivers JEDEC-standard bandwidth and efficiency
  • 288-pin RDIMM form factor ensures direct compatibility with qualified PowerEdge platforms
  • 1Rx8 single-rank organisation optimises signal integrity for registered memory channels

Dell PowerEdge HS5610 HS5620 upgrade

This OWC memory kit delivers 32 GB of DDR5 ECC registered RDIMM capacity across two 16 GB modules. It is built for Dell PowerEdge HS5610 and HS5620 servers and workstations that require registered error-correcting memory. The kit will not work in standard desktop computers or consumer motherboards. Buyers should confirm their system specifically supports registered DDR5 DIMMs before ordering.

Verify registered DDR5 DIMM support

Check that the target server accepts 288-pin DDR5 registered DIMMs running at 4800 MT/s with CL40 latency at 1.1 V. The modules are single-rank 1Rx8 and must not be mixed with unbuffered or load-reduced ECC memory. Ensure the platform firmware is current and that the memory configuration follows Dell's population rules for the HS5610 or HS5620 chassis. Only proceed when the hardware manual confirms compatibility with this exact registered specification.

JEDEC and RoHS compliant kit

The two modules meet JEDEC DDR5 standards and RoHS requirements for a warranty-safe upgrade. No heat spreader is included, so airflow in the server chassis must handle the thermal load. OWC provides a limited lifetime warranty with free technical support and an advanced replacement programme. The bundle contains only the two memory modules; no additional cables, software licences or installation tools are supplied.

I korthet

  • ECC registered design prevents data corruption in Dell PowerEdge HS5610 and HS5620 servers
  • 32GB kit with two 16GB modules expands memory capacity for virtualisation workloads
  • DDR5 4800 CL40 at 1.1V delivers JEDEC-standard bandwidth and efficiency
  • 288-pin RDIMM form factor ensures direct compatibility with qualified PowerEdge platforms
  • 1Rx8 single-rank organisation optimises signal integrity for registered memory channels

Specifikationer

BrandOWC
Part Number4R8D51R8032P
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 ECC RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.1V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
Heat SpreaderNo
Compatible SystemDell PowerEdge HS5610
Dell PowerEdge HS5620

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Does the kit include only the two 16 GB modules or are any tools or cables supplied?

The kit contains two 16 GB DDR5 4800 CL40 ECC registered RDIMMs and nothing else; no tools or cables are included.

Why choose the 32 GB (2 x 16 GB) CL40 kit instead of a different capacity or speed?

This 32 GB kit matches the Dell PowerEdge HS5610 and HS5620 qualified speed of DDR5 4800 CL40 and uses 1Rx8 registered ECC modules required by those servers.

What does the 4800 MT/s rating deliver once installed in a PowerEdge HS5610 or HS5620?

The modules run at the platform native DDR5 4800 rate, providing PC5-38400 bandwidth with CL40 latency for ECC registered operation.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.