Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green rectangular circuit board with gold edge connector and black memory chips

OWC

OWC 8GB DDR4 2133MHz CL15 260-pin SODIMM memory upgrade

SKU CH-H0EH-FAXAY

8GB DDR4 2133MHz CL15 SODIMM module for select HP Envy 27 all-in-one PCs

  • Capacity8GB
  • Type260-Pin DDR4 Non-ECC SODIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCNo
  • 8 GB capacity lets you run more apps simultaneously
  • DDR4 2133 MHz speed provides responsive data transfer for everyday tasks
  • CL15 latency and 1.2 V voltage deliver efficient performance per JEDEC standards
  • 260-pin SODIMM form factor fits the listed HP Envy all-in-one models
  • Non-ECC unbuffered design ensures broad compatibility with supported systems

8GB DDR4 2133MHz SODIMM for HP Envy All-in-Ones

This 8GB DDR4 2133MHz CL15 SODIMM is built for HP Envy 27-b014, 27-b015qe, 27-b021, 27-b100la and 27-b100nb all-in-one PCs. It uses a 260-pin unbuffered non-ECC layout at 1.2V and meets JEDEC PC4-17000 specifications. The module adds capacity to compatible systems without requiring configuration changes. Buyers needing ECC or registered memory cannot use this part.

Sustained load behaviour at CL15 2133MHz

The CL15 timing at 2133MHz delivers consistent bandwidth for everyday multitasking and larger file handling. JEDEC-compliant 1.2V operation keeps thermals steady during extended sessions without a heat spreader. The 2Rx8 organisation supports stable throughput when multiple applications remain open. Systems limited to lower memory speeds will not gain extra bandwidth from this module.

260-pin unbuffered design for tool-less upgrades

The standard SODIMM edge connector fits the SO-DIMM slots in the listed Envy models for straightforward DIY installation. No heat spreader means the module clears tight chassis clearances common in all-in-one designs. RoHS-compliant construction and JEDEC compliance protect the original system warranty. Builders needing DIMM form factors or higher voltage modules must choose a different product.

I korthet

  • 8 GB capacity lets you run more apps simultaneously
  • DDR4 2133 MHz speed provides responsive data transfer for everyday tasks
  • CL15 latency and 1.2 V voltage deliver efficient performance per JEDEC standards
  • 260-pin SODIMM form factor fits the listed HP Envy all-in-one models
  • Non-ECC unbuffered design ensures broad compatibility with supported systems

Specifikationer

BrandOWC
Part Number2S1D42R808GB
Capacity8GB
Type260-Pin DDR4 Non-ECC SODIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP ENVY 27-b014
HP ENVY 27-b015qe
HP ENVY 27-b021
HP ENVY 27-b100la
HP ENVY 27-b100nb

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

How much heat or power does the 1.2V DDR4 2133MHz CL15 SODIMM draw when the HP Envy 27 runs all day?

At 1.2 volts the module runs within standard DDR4 limits, producing minimal heat and drawing only the power needed for 2133 MHz operation. No extra cooling is required.

What must my HP Envy 27 already have for this 260-pin 8GB stick to work?

The all-in-one needs a free DDR4 SODIMM slot that accepts 260-pin unbuffered non-ECC memory at 2133 MHz. The listed models 27-b014, 27-b015qe, 27-b021, 27-b100la and 27-b100nb meet that requirement.

Will this CL15 2133MHz module run correctly alongside the original memory still installed in my HP Envy 27?

Yes. The stick follows JEDEC DDR4 2133 CL15 timings at 1.2 V, so it will match the factory modules in the compatible Envy 27 models and the system will clock both to the same speed.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.