Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Three 120mm transparent RGB case fans with hydraulic bearings and rubber pads, plus a wireless remote controller

PANO-MOUNTS

PANO-MOUNTS 12025RGBC3PACK 120mm RGB case fan 3-pack with remote controller

SKU CH-Z712-5G862

Three 120 mm RGB case fans with hydraulic bearings, a controller supporting up to 10 fans and a wireless remote for colour, brightness and speed adjustment

  • Fan Size120×120×25mm 4.72*4.72*0.98in
  • LEDRGB
  • TypeCase Fan
  • Bearing TypeHydraulic Bearing
  • RPMVariable
  • Air Flow50-55 CFM

LED RGB

  • 360° illumination from 12 LEDs per fan
  • Wireless remote adjusts colour, brightness and on/off
  • Hydraulic bearing with rubber pads for quiet operation
  • Three fans deliver 50-55 CFM airflow at 25-30 dBA
  • Single controller manages up to 10 fans via 6-pin connectors

120mm RGB 3-Pack for Case Cooling

This PANO-MOUNTS 12025RGBC3PACK includes three 120mm RGB case fans, a controller and a wireless remote. The hydraulic bearing fans deliver 50-55 CFM airflow at 25-30 dBA noise. They suit gamers and builders wanting synchronised lighting and standard 120mm mounting points.

Replaces Single Stock Fans or Non-RGB Sets

The pack upgrades a single factory fan or a basic non-LED trio with 360-degree illumination and 366+ automated colour cycles. The jump is worth it when you want remote speed and brightness control across up to 10 fans from one controller without opening the case.

Check 120mm Mounts, 4-Pin Headers and 12V RGB Wiring

Verify your chassis has three 120mm mounting locations and enough 4-pin fan headers or a splitter. The 6-pin RGB connector requires the included controller; motherboard 5V ARGB or 12V RGB headers are not used. Ensure 400mm cables reach your routing plan.

I korthet

  • 360° illumination from 12 LEDs per fan
  • Wireless remote adjusts colour, brightness and on/off
  • Hydraulic bearing with rubber pads for quiet operation
  • Three fans deliver 50-55 CFM airflow at 25-30 dBA
  • Single controller manages up to 10 fans via 6-pin connectors

Specifikationer

BrandPANO-MOUNTS
Series12025 Series
Model12025RGBC3PACK
Part Number12025RGBC3PACK
Fan Size120×120×25mm 4.72*4.72*0.98in
LEDRGB
TypeCase Fan
Bearing TypeHydraulic Bearing
RPMVariable
Air Flow50-55 CFM
Noise Level25 - 30 dBA
Power Connector4 Pin
ColorMulticolor
CompatibilityCase
Fan Counts3 Fans
Fan ControllerController
Fan Thickness25mm
Air Pressurenon
MTBFnon
Sports Teamnon
Sports Leaguenon
FeaturesRF WIRELESS REMOTE
Dimensions120×120×25mm 4.72*4.72*0.98in
Package ContentsFAN, WIRELESS REMOTE

Andra versioner av den här modellen

1 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

What are the physical dimensions and mounting requirements for the 120mm fans?

Each fan measures 120×120×25mm with four corner screw holes and included rubber pads covering 80% of the corners for vibration reduction.

How do I connect the 6-pin RGB connectors and the 4-pin power cables to the controller?

Plug each fan's 6-pin connector into the controller ports, then connect the 4-pin power cables to the motherboard or power supply; the controller supports up to 10 fans.

When should I expect to replace the hydraulic-bearing fans based on the rated working life?

The fans are rated for 40000 hours of operation; plan replacement around that interval if noise or airflow degrades.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.