Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Three white 140mm case fans with DRGB lighting and daisy-chain cables

Phanteks

Phanteks PH-F140M25_DRGB_PWM_WT01_3P 140mm case fan 3-pack white

SKU CH-RJWX-YVKHP MPN PH-F140M25_DRGB_PWM_WT01_3P

Three 140 mm white case fans with hydraulic bearings, 500–1800 RPM PWM control, 104.62 CFM airflow and addressable DRGB lighting

  • Fan Counts3 Fans
  • TypeCase Fan
  • Fan Size140mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic
  • RPM500-1800±10% RPM

Fan Size 140mm

Style Regular

Model M25

Option Triple Fans

Genomstrukna varianter finns, men är inte i lager här.

  • Three fans deliver 104.62 CFM each for strong airflow
  • Hydraulic bearing runs at 36.57 dB(A) for quiet operation
  • PWM control spans 500 to 1800 RPM for precise speed tuning
  • Daisy-chain cables link all three fans to one PWM header
  • DRGB lighting connects straight to a motherboard A/D-RGB header

Three 140mm white fans for high-airflow builds

This three-pack delivers 140mm case fans in white, each 25mm thick with a hydraulic bearing and DRGB lighting. They suit builders who want strong airflow through restrictive mesh, filters or radiators while keeping cable runs tidy via daisy-chained PWM and lighting connectors. The fans target users who value measurable static-pressure performance and a clean aesthetic in a single kit.

Check 140mm mounts and a 4-pin PWM header before

Verify your chassis or radiator has three 140mm mounting positions and that your motherboard or controller provides a 4-pin PWM header for speed control. The daisy-chain cables require enough slack to link all three fans in series, so confirm internal clearance for the combined cable run. A compatible 5V addressable RGB header or the included adapter is needed to drive the DRGB lighting.

Hydraulic bearing and wide RPM range sustain

At full speed the fans reach 1800 RPM and move 104.62 CFM while producing 36.57 dB(A), a ratio designed to maintain pressure through dense fin stacks without excessive noise. The hydraulic bearing and 500 to 1800 RPM PWM range allow the curve to stay in its efficient zone during long gaming or rendering sessions, reducing bearing wear and motor whine compared with fans that must spin faster for similar output.

I korthet

  • Three fans deliver 104.62 CFM each for strong airflow
  • Hydraulic bearing runs at 36.57 dB(A) for quiet operation
  • PWM control spans 500 to 1800 RPM for precise speed tuning
  • Daisy-chain cables link all three fans to one PWM header
  • DRGB lighting connects straight to a motherboard A/D-RGB header

Specifikationer

BrandPhanteks
ModelM25-140 D-RGB Fan, White
Part NumberPH-F140M25_DRGB_PWM_WT01_3P
Fan Counts3 Fans
TypeCase Fan
Fan Size140mm
Fan Thickness25mm
Bearing TypeHydraulic
RPM500-1800±10% RPM
Air Flow104.62 CFM
Noise Level36.57 dB(A)
Power Connector4 Pin
ColorWhite
LEDDRGB
Fraktvikt0.68 kg
Paketstorlek165 × 140 × 83 mm

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

What comes in the box and do I need extra cables?

The pack contains three 140 mm white fans with hydraulic bearings, pre-attached daisy-chain cables and a motherboard DRGB adapter; no separate PWM or lighting cables are required.

How do I decide between the speed and noise levels offered?

PWM lets the fans run from 500 to 1800 RPM; at the top speed they deliver 104.62 CFM at 36.57 dB(A), so choose lower RPM for silence or max RPM for radiator cooling.

What does the 104.62 CFM figure mean once the fans are installed?

At 1800 RPM each fan moves 104.62 CFM, giving strong airflow through dense mesh filters, heatsinks or radiators while the hydraulic bearing keeps motor noise low.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.