Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
White rectangular thermal pad sheet on protective foil

Phobya

Phobya 17134 thermal pad 7 W/mK 120 x 100 x 0.5 mm

SKU CH-RK2F-4RABF MPN 17134

High-conductivity 7 W/mK thermal pad measuring 120 x 100 x .5 mm, electrically non-conductive and designed to bridge gaps up to 1.0 mm on VRAM, VRM and chipset coolers

  • FeaturesAll new: Phobya's improved thermal pads with 7W/mK are able
  • High thermal conductivity of 7 W/mK matches premium compounds
  • 120 x 100 x 0.5 mm sheet fits VRAM, VRM and chipset coolers
  • Electrically non-conductive material prevents short circuits on exposed circuits
  • Flexible low-hardness pad bridges gaps up to 1.0 mm with light pressure
  • Protective foil on both sides peels off for clean installation

High-performance thermal pad XT

Phobya model 17134 is a thermal pad rated at 7 W/mK conductivity. The white, electrically non-conductive material measures 120 by 100 by 0.5 mm. It is designed to fill gaps up to 1.0 mm between components and heatsinks. A protective foil covers the surface and must be removed before installation.

Builders needing compliant gap fill

This pad suits enthusiasts replacing dried pads on GPU memory, VRM heatsinks or chipset blocks where surfaces are uneven. Its soft structure conforms at low pressure without damaging delicate dies. Buyers who need a thin paste layer for perfectly flat CPU heat spreaders should look at thermal compounds instead.

7 W/mK conductivity rating

The 7 W/mK figure is the single specification that determines if this pad meets your thermal budget. It sits between standard silicone pads and premium liquid-metal pastes in performance. Verify that your target components specify a pad of this conductivity or higher before purchasing.

I korthet

  • High thermal conductivity of 7 W/mK matches premium compounds
  • 120 x 100 x 0.5 mm sheet fits VRAM, VRM and chipset coolers
  • Electrically non-conductive material prevents short circuits on exposed circuits
  • Flexible low-hardness pad bridges gaps up to 1.0 mm with light pressure
  • Protective foil on both sides peels off for clean installation

Specifikationer

BrandPhobya
Model17134
Part Number17134
FeaturesAll new: Phobya's improved thermal pads with 7W/mK are able to match even high-end thermal compounds! These "XT" thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures.

Frågor om den här produkten

What are the exact dimensions of the Phobya 17134 thermal pad?

The pad measures 120 mm by 100 mm with a thickness of 0.5 mm, making it suitable for VRAM and VRM modules on graphics cards and motherboards.

How is the protective foil handled during installation of the Phobya 17134 thermal pad?

Remove the protective foil from both sides of the pad before placing it between the component and heatsink; forgetting to peel both layers is a common error that blocks heat transfer.

When should the Phobya 17134 thermal pad be replaced?

Replace the pad whenever the cooler is removed or if temperatures rise over time, as the material can compress permanently and lose its ability to bridge gaps up to 1.0 mm.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.